cuisinart 14 cup coffee maker manual

The Cuisinart 14-Cup Coffee Maker is a programmable coffee brewing system featuring a 14-cup glass carafe, 24-hour programmability, auto shut-off, brew pause function, charcoal water filter, adjustable warming plate, and a reusable gold-tone filter. It includes a cleaning cycle, self-cleaning function, and a 3-year warranty. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming Guide 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 14-Cup Glass Carafe, Charcoal Water Filter, Reusable Gold-Tone Filter, Programmable Clock/Timer, Control Panel, Warming Plate, Water Reservoir.

FeatureDescription
14-Cup CapacityBrews up to 14 cups (4 oz per cup) of coffee
24-Hour ProgrammabilitySet brew time in advance
Auto Shut-OffAutomatically turns off after brewing (0-4 hours adjustable)
Brew Pause FunctionPause brewing to pour a cup mid-cycle
Charcoal Water FilterRemoves impurities for better tasting coffee
Adjustable Warming PlateKeep coffee warm (Low/High settings)
Reusable Gold-Tone FilterPermanent filter included; no paper filters needed
Self-Cleaning FunctionCleans internal components with water/vinegar solution
Cleaning Cycle IndicatorLight alerts when cleaning is needed
Power Cord StorageWrap excess cord under unit

Installation

Unpack and inspect contents. Place on clean, dry, level surface away from edges.

  1. Remove all packaging materials and stickers.
  2. Wash carafe, lid, and filter basket with warm soapy water; rinse thoroughly.
  3. Insert charcoal water filter into holder in water reservoir (soak filter first per instructions).
  4. Place empty carafe on warming plate.
  5. Plug into 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Keep away from heat sources.

First-Time Setup

Before first use, run a cleaning cycle with water only.

  1. Fill water reservoir to MAX line with clean water.
  2. Place empty carafe on warming plate.
  3. Press ON/OFF to turn unit on.
  4. Press CLEAN button; cleaning cycle will run (approx. 10 minutes).
  5. Discard water from carafe after cycle.
  6. Set clock: Press and hold HOUR and MINUTE buttons to set current time.

CAUTION! Ensure carafe is properly seated on warming plate before brewing.

Specifications

Controls and Settings

Control Panel: ON/OFF, PROGRAM, HOUR, MINUTE, AUTO ON, AUTO OFF, CLEAN, 1-4 CUP, BREW PAUSE.

Indicator Lights: POWER, PROGRAM, AUTO ON, AUTO OFF, CLEAN.

Settings: Clock set via HOUR/MINUTE. Program brew time: Press PROGRAM, set time with HOUR/MINUTE, press AUTO ON. Auto shut-off: Press AUTO OFF repeatedly to select 0, 0.5, 1, 2, or 4 hours. 1-4 Cup setting: Adjusts brewing strength for small batches. Brew Pause: Press during brewing to pour a cup.

Brewing Coffee

For best results, use fresh cold water and medium grind coffee.

  1. Fill water reservoir to desired level (MIN to MAX lines).
  2. Insert gold-tone filter into filter basket.
  3. Add coffee grounds: 1 tablespoon per cup (adjust to taste).
  4. Place carafe on warming plate.
  5. Press ON/OFF to start brewing immediately.
  6. For programmed brew: Set AUTO ON time (see Programming Guide).
  7. Use BREW PAUSE to pour a cup during brewing (wait 10 seconds after start).
  8. After brewing, auto shut-off activates per setting.

Tip: For 1-4 cups, press 1-4 CUP button for optimal flavor.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

  1. Daily: Wash carafe, lid, and filter basket in warm soapy water.
  2. Monthly: Run cleaning cycle with vinegar solution (1 part vinegar to 2 parts water).
  3. Charcoal Filter: Replace every 60 uses or 2 months (soak new filter 15 minutes first).
  4. Exterior: Wipe with damp cloth; do not use abrasive cleaners.
  5. Descale: If mineral buildup occurs, use commercial descaler per instructions.

CAUTION! Unplug before cleaning. Never immerse base in water.

Programming Guide

To set auto brew time:

  1. Press and hold PROGRAM until PROGRAM light flashes.
  2. Press HOUR and MINUTE to set desired brew time.
  3. Press AUTO ON to confirm; AUTO ON light stays on.
  4. To cancel, press and hold PROGRAM until PROGRAM light turns off.

To set auto shut-off:

  1. Press AUTO OFF repeatedly to cycle through 0, 0.5, 1, 2, 4 hours.
  2. Selected time will be indicated by corresponding light.

Note: Clock must be set correctly for programming to work.

Regulatory Information

UL Listed. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

SymptomPossible CauseCorrective Action
Coffee maker won't turn onPower/outletCheck plug connection; try different outlet; ensure ON/OFF pressed.
Coffee not brewingWater reservoir emptyFill reservoir to MIN line or above.
Coffee tastes badOld filter/coffeeReplace charcoal filter; use fresh coffee; clean unit.
Leaking waterMisaligned carafe/filterEnsure carafe properly seated; check filter basket placement.
Auto program not workingClock not setSet correct time; reprogram auto on.
Cleaning light onMaintenance requiredRun cleaning cycle with vinegar solution.
Weak coffeeIncorrect grind/measureUse medium grind; increase coffee grounds.

Reset: Unplug for 1 minute, then replug to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com

cuisinart 14 cup coffee maker manual © - All Rights Reserved 2025