Cuisinart Brew Central CBC-6400PC Manual

The Cuisinart Brew Central CBC-6400PC is a 14-cup programmable coffee maker with a stainless steel finish, 24-hour programmability, auto shut-off, self-cleaning function, and a charcoal water filter. It features a brew pause function, adjustable warming plate, and a permanent gold-tone filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 14-cup glass carafe, Charcoal water filter, Permanent gold-tone filter, Control panel with LCD display, Water reservoir, Warming plate.

Feature	Description
Programmable Timer	Set brew time up to 24 hours in advance
Auto Shut-Off	Automatically turns off after brewing (0-4 hours adjustable)
Brew Pause	Pause brewing to pour a cup before cycle completes
Self-Cleaning	Cleans mineral deposits with vinegar solution
Charcoal Water Filter	Removes chlorine and impurities for better taste
Adjustable Warming Plate	Keep coffee at desired temperature after brewing
LCD Display	Shows time, programming status, and alerts
Permanent Filter	Gold-tone filter eliminates need for paper filters
Audible Signal	Beeps when brewing is complete
Cord Storage	Wrap excess cord under base

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from inside and outside the unit.
Wash carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert charcoal water filter into filter holder in water reservoir (soak filter first for 15 minutes).
Place empty carafe on warming plate.
Plug into 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Keep away from heat sources.

First-Time Setup

Power on coffee maker; follow initial setup steps.

Set clock: Press and hold CLOCK button, use HOUR and MIN buttons to set time.
Prime the system: Fill reservoir with water, place empty carafe, press BREW button to run a cycle without coffee.
Install filter: Place permanent filter in filter basket.
Adjust warming plate: Use WARMING PLATE button to select temperature (Low, Medium, High).

CAUTION! Ensure carafe is properly seated on warming plate before brewing.

Specifications

Capacity: 14 cups (maximum).
Power: 120V AC, 60Hz, 900W.
Carafe: Glass with ergonomic handle and lid.
Filter: Permanent gold-tone filter; includes charcoal water filter.
Programmability: 24-hour advance brew start.
Auto Shut-Off: Adjustable from 0 to 4 hours.
Warming Plate: Adjustable temperature settings.
Dimensions: 10.5" H x 8.5" W x 14" D.
Weight: 5.5 lbs.

Controls and Settings

Control Panel: POWER, BREW, PROGRAM, CLOCK, HOUR, MIN, WARMING PLATE, AUTO OFF.

LCD Display: Shows time, programming status, and alerts.

Clock Setting: Press and hold CLOCK, adjust with HOUR/MIN. Programming: Press PROGRAM, set brew time with HOUR/MIN, press PROGRAM again to confirm. Auto Shut-Off: Press AUTO OFF to select duration (0, 1, 2, 3, 4 hours). Warming Plate: Press WARMING PLATE to cycle through Low, Medium, High.

Brewing Coffee

Supports ground coffee; use medium grind for best results.

Fill reservoir with cold water using carafe markings.
Place permanent filter in basket; add ground coffee (1 tablespoon per cup).
Place carafe on warming plate; ensure lid is closed.
Press BREW to start immediate brewing.
Use BREW PAUSE to pour a cup during cycle.
When brewing completes, audible signal sounds; auto shut-off activates per setting.

Tip: For optimal taste, replace charcoal water filter every 60 cycles or 2 months.

Cleaning & Maintenance

Unplug before cleaning. Clean exterior with damp cloth; wash carafe and filter after each use.

Self-cleaning cycle: Mix equal parts white vinegar and water in reservoir. Place empty carafe, press BREW. Halfway through, turn off, let sit 30 minutes, then complete cycle. Run 2-3 cycles with clean water to rinse.
Charcoal filter replacement: Replace every 60 cycles or 2 months.
Descale: Perform self-cleaning monthly if using hard water.

CAUTION! Do not use abrasive cleaners; never immerse base in water.

Programming

Set brew time up to 24 hours in advance.

Ensure clock is set correctly.
Press PROGRAM; "PROG" appears on display.
Use HOUR and MIN to set desired brew start time.
Press PROGRAM again to confirm.
Add water and coffee; unit will brew at set time.
To cancel program, press and hold PROGRAM until "PROG" disappears.

Note: If power is interrupted, reprogram after restoring power.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Not plugged in / outlet issue	Ensure plug is secure; try different outlet; check circuit breaker.
Coffee doesn't brew	Program not set / water empty	Check water level; press BREW for immediate cycle; ensure PROGRAM is set correctly.
Weak coffee	Incorrect grind / old filter	Use medium grind; replace charcoal filter; clean permanent filter.
Leaking	Misaligned carafe / overfilled	Ensure carafe is properly seated; do not exceed 14-cup mark.
Display blank	Power interruption	Unplug, wait 10 seconds, replug; reset clock.
Bitter taste	Old coffee / dirty system	Use fresh coffee; perform self-cleaning cycle.

Reset: Unplug for 30 seconds to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com