Cuisinart Brew Central DCC-2200RC Manual

The Cuisinart Brew Central DCC-2200RC is a 12-cup programmable coffeemaker featuring a 24-hour advance brew start, 1-4 cup setting, auto shut-off, pause & serve, charcoal water filter, and a gold-tone commercial-style filter. It includes a glass carafe with ergonomic handle, illuminated on/off switch, and digital clock with programmable settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Programming Guide 8. Safety Features 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-cup glass carafe, Charcoal water filter, Gold-tone commercial-style filter, Digital clock with programmable timer, Illuminated on/off switch.

Feature	Description
24-Hour Programmable Timer	Set brew time up to 24 hours in advance
1-4 Cup Setting	Optimizes brewing for smaller quantities
Auto Shut-Off	Automatically turns off after brewing is complete (0-4 hours)
Pause & Serve	Allows serving coffee before brewing cycle finishes
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee
Gold-Tone Filter	Permanent filter for use without paper filters
Illuminated On/Off Switch	Easy-to-see power indicator
Brew Strength Selector	Choose Regular or Bold brew strength
Digital Clock	Displays time and programming status
Ready Tone	Audible signal when brewing is complete

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from coffeemaker and carafe.
Wash carafe, filter basket, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert charcoal water filter into filter holder (soak filter first for 15 minutes).
Place coffeemaker on stable, heat-resistant surface away from edges.
Plug power cord into 120V AC outlet.

WARNING! Do not place coffeemaker where cord could be tripped over. Keep away from water sources.

First-Time Setup

Before first use, run a brewing cycle with water only to clean the system.

Fill water reservoir with fresh cold water to 12-cup mark.
Place empty carafe on warming plate.
Press ON/OFF switch to begin brewing cycle.
Discard water after cycle completes.
Set time: Press and hold HOUR and MINUTE buttons to set current time.
Insert charcoal filter if not already installed.

CAUTION! Ensure carafe is properly positioned before brewing. Handle hot surfaces with care.

Specifications

Capacity: 12 cups (60 oz).
Power: 120V AC, 60Hz, 900W.
Dimensions: 10.5" W x 8" D x 14" H.
Weight: 5.5 lbs.
Filter Type: Gold-tone commercial-style permanent filter.
Water Filtration: Charcoal water filter included.
Programmability: 24-hour advance brew start.
Auto Shut-Off: Programmable 0-4 hours.
Brew Strength: Regular or Bold setting.
Warranty: 3-year limited warranty.

Controls and Settings

Front Panel: ON/OFF switch, PROGRAM button, HOUR/MINUTE buttons, CLOCK button, BREW STRENGTH button, AUTO OFF button.

Display Indicators: Clock display, PROGRAM light, READY light, AUTO OFF light.

Basic Operation: Press ON/OFF to start immediate brewing. Programming: Press PROGRAM, then HOUR/MINUTE to set brew time. Brew Strength: Press BREW STRENGTH to toggle between Regular and Bold. Auto Shut-Off: Press AUTO OFF to set duration (0, 1-4 hours). Clock Setting: Press and hold HOUR/MINUTE to adjust time.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Empty and rinse carafe and filter basket after each use.
Weekly: Clean exterior with damp cloth; descale if needed (vinegar solution).
Monthly: Replace charcoal water filter (every 60 brew cycles or 2 months).
As needed: Clean permanent filter with soft brush and warm water.

Tip: Never immerse coffeemaker base in water. Unplug before cleaning.

Programming Guide

To program advance brewing:

Set current time using HOUR and MINUTE buttons.
Press PROGRAM button - PROGRAM light will illuminate.
Use HOUR and MINUTE buttons to set desired brew time.
Press PROGRAM again to confirm - clock will display programmed time.
Fill water reservoir and add coffee to filter basket.
Coffeemaker will automatically brew at set time.

To cancel program: Press and hold PROGRAM for 3 seconds until light turns off.

Safety Features

Auto Shut-Off: Turns off heating element after brewing cycle (0-4 hour setting). Pause & Serve: Safely interrupt brewing to serve coffee. Overheat Protection: Automatic shut-off if unit overheats. Drip-Free Pour Spout: Prevents spills during serving.

Care Instructions

Unplug before cleaning. Use only damp cloth for exterior; never use abrasive cleaners.

CAUTION! Do not use coffeemaker without water. Never operate without carafe in place.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	Power cord/outlet	Check power cord connection; test outlet; ensure ON/OFF is pressed.
Coffee doesn't brew	Water reservoir/programming	Ensure water in reservoir; check if programmed correctly; reset unit.
Coffee tastes bad	Old filter/coffee/water	Replace charcoal filter; use fresh coffee; clean with vinegar solution.
Program not working	Time setting	Ensure current time is set correctly; reprogram brew time.
Leaking	Carafe position/filter	Ensure carafe is properly seated; check filter basket for proper placement.
Auto shut-off not working	Setting	Press AUTO OFF button to set desired shut-off time (1-4 hours).

Reset: Unplug for 10 minutes, then plug back in to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com