Cuisinart Brew Central Thermal Manual

The Cuisinart Brew Central Thermal is a 12-cup programmable coffeemaker featuring a double-wall stainless steel thermal carafe to keep coffee hot for hours without a warming plate. It includes a 24-hour programmability, auto shut-off, brew pause, charcoal water filter, and self-clean function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel thermal carafe, Charcoal water filter, Programmable LCD display, Brew pause function, Self-clean indicator.

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

1. Remove all packaging materials from carafe and coffeemaker.
2. Wash carafe lid and filter basket with warm, soapy water; rinse thoroughly.
3. Insert charcoal water filter into filter holder (soak filter first for 5 minutes).
4. Plug into 120V AC outlet.

WARNING! Keep cord away from heated surfaces. Do not immerse coffeemaker in water.

First-Time Setup

Before first use, run a brewing cycle with water only.

1. Fill water reservoir with clean water to MAX line.
2. Place empty carafe on warming plate.
3. Press POWER to turn on; press BREW to start cycle.
4. Discard water after cycle completes.
5. Set clock time: Press and hold HOUR and MINUTE buttons.

CAUTION! Handle carafe carefully; contents remain hot after brewing.

Specifications

• Capacity: 12 cups (60 oz).
• Carafe: Double-wall stainless steel thermal.
• Programming: 24-hour advance brew start.
• Auto Shut-Off: 0-4 hours programmable.
• Filter: Permanent gold-tone filter with charcoal water filter.
• Special Features: Brew pause, strength selector, self-clean indicator.
• Power Source: 120V AC, 60Hz.
• Cord Length: 30 inches.
• Dimensions: 10.5" W x 14.5" H x 8" D.

Controls and Settings

Front Panel: POWER, PROGRAM, HOUR, MINUTE, AUTO OFF, BREW, STRENGTH, CLEAN.

LCD Display: Shows time, PROGRAM indicator, AUTO OFF setting.

Settings: Clock time (12/24 hour format), Program start time, Auto shut-off (0, 2, or 4 hours), Brew strength (Regular/Bold), Self-clean cycle.

Brewing Coffee

For best results, use fresh cold water and medium grind coffee.

1. Fill water reservoir to desired cup level.
2. Place filter in basket; add coffee (1 tablespoon per cup).
3. Place carafe on warming plate; ensure lid is closed.
4. Press POWER, then BREW to start.
5. Use BREW PAUSE to pour a cup during brewing.
6. When brewing completes, carafe keeps coffee hot for hours.

Tip: Replace charcoal filter every 60 cycles or 2 months.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

1. Daily: Wash carafe and lid with warm, soapy water.
2. Weekly: Clean filter basket and water reservoir.
3. Monthly: Run self-clean cycle when CLEAN light illuminates.
4. Descale: Use vinegar solution every 3-6 months to remove mineral deposits.

WARNING! Unplug before cleaning. Never immerse coffeemaker in water.

Programming Guide

Set the coffeemaker to brew automatically at a specific time.

1. Set current time using HOUR and MINUTE buttons.
2. Press PROGRAM; set desired brew time using HOUR and MINUTE.
3. Press PROGRAM again to confirm.
4. Ensure water and coffee are loaded; coffeemaker will brew at set time.
5. Set AUTO OFF duration (0, 2, or 4 hours) for automatic shut-off.

Note: Programmed time is retained during power outages.

Care & Storage

Unplug and cool completely before storing. Store in dry place.

CAUTION! Do not use abrasive cleaners; avoid contact with heating element.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Reset: Unplug for 10 seconds, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com