Cuisinart Buona Tazza EM-600 SERIES Manual

The Cuisinart Buona Tazza EM-600 SERIES is a premium automatic espresso and cappuccino maker designed for home use. It features a 15-bar pump pressure system, integrated conical burr grinder with adjustable settings, programmable cup sizes, a removable water reservoir, a frothing wand for milk-based drinks, and a warming tray. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee & Espresso 7. Frothing Milk 8. Cleaning & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Conical burr grinder, 15-bar pump, Frothing wand, Removable water tank, Drip tray, Programmable buttons, Warming plate.

Feature	Description
Conical Burr Grinder	Adjustable grind settings from fine to coarse
15-Bar Pump Pressure	Optimal pressure for extracting espresso
Frothing Wand	Steam wand for heating and frothing milk
Removable Water Tank	1.8L capacity, easy to fill and clean
Programmable Buttons	Customize espresso and coffee volume
Warming Plate	Keeps cups warm during operation
Drip Tray	Removable for easy cleaning
Power Button	Turns machine on/off
Grind Control Dial	Adjusts grind coarseness
Brew Selector	Chooses between espresso, coffee, or hot water

Installation

Unpack and inspect all components. Place on a clean, stable, and dry surface near a power outlet.

Remove all packaging materials and stickers from the machine.
Wash the water tank, drip tray, and portafilter with warm, soapy water. Rinse and dry thoroughly.
Fill the water tank with fresh, cold water and insert it into the machine.
Plug the power cord into a grounded 120V AC outlet.

WARNING! Ensure the machine is placed on a heat-resistant surface away from edges. Keep away from children.

First-Time Setup

Before first use, prime the machine by running water through the system without coffee.

Ensure the water tank is full and properly seated.
Turn the machine ON using the power button.
Place a cup under the brew head. Select the hot water function and run water for 30 seconds to flush the system.
Program your preferred cup sizes: Hold the espresso or coffee button until desired volume is reached, then release to save.
Adjust the grind setting dial based on your coffee type (start at medium).

CAUTION! Do not touch hot surfaces during operation. Use handles provided.

Specifications

Model: EM-600 Series
Power: 120V AC, 60Hz, 1450W
Water Tank Capacity: 1.8 Liters
Pump Pressure: 15 bar
Grinder Type: Conical burr, adjustable
Dimensions (WxDxH): 12.2" x 9.8" x 14.6"
Weight: 18.7 lbs
Materials: Brushed stainless steel housing, BPA-free components
Warranty: 3-year limited warranty

Controls and Settings

Front Panel Controls: Power Button, Programmable Espresso/Coffee Buttons, Steam Button, Grind Control Dial, Brew Selector.

Display Indicators: Power On, Ready to Brew, Water Tank Empty, Descaling Alert.

Settings: Grind Size (1-10), Cup Size Programming (Espresso/Lungo, Coffee), Temperature Control (Low/Med/High), Auto-Off Timer (30 min default).

Brewing Coffee & Espresso

For optimal extraction, use freshly roasted beans and filtered water.

Ensure machine is ON and heated (Ready light illuminated).
Fill the bean hopper with whole coffee beans.
Select grind size using the dial (finer for espresso, coarser for coffee).
Place a cup under the brew head.
Select your beverage: Press Espresso for a single shot, or Coffee for a longer brew.
The machine will automatically grind, tamp, and brew.
To stop brewing manually, press the button again.

Tip: Preheat your cup with hot water for a better temperature experience.

Frothing Milk

Create cappuccinos and lattes using the steam wand.

After brewing espresso, press the Steam button. Wait for the steam ready indicator.
Fill a pitcher with cold milk (do not exceed half full).
Submerge the steam wand tip just below the milk surface. Turn the steam knob to open.
Keep the wand tip near the surface to create froth, then submerge to heat the milk.
Turn the steam knob to close when milk reaches desired temperature (approx. 150°F).
Wipe the steam wand with a damp cloth immediately and purge any residual milk.

WARNING! Steam is extremely hot. Never touch the wand during or immediately after use.

Cleaning & Maintenance

Daily: Empty drip tray and grounds container. Wipe steam wand and brew group with a damp cloth.

Weekly: Clean the water tank and drip tray with mild detergent. Rinse thoroughly.

Monthly Descaling: Run descaling solution through the machine as per instructions to remove mineral buildup.

CAUTION! Always unplug the machine before cleaning. Never immerse the main unit in water.

Safety Information

Read all instructions before use. For household use only. Do not operate if cord or plug is damaged. Do not use outdoors. Keep cord away from hot surfaces. To prevent fire or shock hazard, do not expose to rain or moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Cuisinart. Cuisinart is a registered trademark of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	No power	Check power outlet; ensure cord is plugged in securely.
No water flow	Empty tank/clog	Fill water tank; descale machine if clogged.
Coffee is too weak	Grind too coarse	Adjust grind setting to a finer setting.
No steam from wand	Not in steam mode	Press Steam button and wait for ready light.
Grinder makes noise/no grind	No beans/blockage	Fill bean hopper; check for foreign objects.
Descaling light is on	Mineral buildup	Perform descaling procedure.

Reset: Unplug machine for 2 minutes, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com