Cuisinart Burr Grind & Brew DGB-900BC Manual

The Cuisinart Burr Grind & Brew DGB-900BC is a fully automatic coffee maker with an integrated conical burr grinder. It features programmable settings, a 24-hour advance brew start timer, automatic shutoff, a charcoal water filter, a permanent gold-tone filter, and a thermal stainless steel carafe. It grinds beans right before brewing for maximum freshness. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Grinding & Brewing 7. Programming 8. Cleaning & Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Conical Burr Grinder, Bean Hopper, Grind Selector, Water Reservoir, Charcoal Filter Holder, Thermal Carafe, Control Panel with LCD Display.

Feature	Description
Conical Burr Grinder	Grinds beans uniformly for optimal flavor extraction
Programmable Timer	Set to grind and brew automatically up to 24 hours in advance
Grind Selector	Adjustable from fine to coarse grind settings
Brew Strength Selector	Choose Regular or Bold brew strength
Thermal Carafe	Stainless steel, double-wall insulated to keep coffee hot
Charcoal Water Filter	Removes impurities for better tasting coffee (included)
Permanent Gold-Tone Filter	Eliminates the need for paper filters
LCD Display	Shows time, programming status, and alerts
Auto Shut-Off	Automatically turns off 0-4 hours after brewing (programmable)
Pause & Serve	Interrupt brewing to pour a cup mid-cycle

Installation & Setup

Unpack and inspect all parts. Place on a clean, dry, level surface near a power outlet.

Rinse Components: Wash the carafe, filter basket, and water reservoir with warm, soapy water. Rinse thoroughly.
Install Charcoal Filter: Insert the charcoal water filter into the holder in the water reservoir. Soak filter completely for 15 minutes before first use.
Insert Permanent Filter: Place the permanent gold-tone filter into the filter basket.
Fill Water Reservoir: Add fresh, cold water to the desired level (up to 12 cups).
Plug In: Connect the power cord to a 120V AC outlet.

WARNING! Do not immerse the base, cord, or plug in water or other liquids. Ensure the unit is on a stable, heat-resistant surface.

First-Time Use

Before brewing coffee, perform a cleaning brew cycle to remove any manufacturing residues.

Ensure the carafe is empty and correctly positioned on the warming plate.
Fill the water reservoir with fresh water up to the 12-cup mark.
Press the POWER button to turn the unit on. The LCD will illuminate.
Press and hold the CLEAN button for 3 seconds. The CLEAN light will blink.
Press the BREW button to start the cleaning cycle. The unit will run water through the system without grinding.
Discard the water from the carafe after the cycle is complete. The machine is now ready for use.

CAUTION! The carafe and brewed coffee will be hot. Use handles and avoid steam.

Specifications

Model: DGB-900BC
Type: Programmable Burr Grind & Brew Coffee Maker
Capacity: Up to 12 cups (5.7 oz per cup) / 1.8 liters
Grinder: Conical Burr, 18 adjustable settings
Carafe: Double-wall insulated stainless steel thermal carafe
Filter: Permanent gold-tone filter (included)
Water Filtration: Charcoal water filter (included)
Programmability: 24-hour advance timer, auto shut-off (0-4 hrs)
Power Source: 120V AC, 60Hz, 1050W
Dimensions (approx.): 11.5" W x 15.5" H x 9" D

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MIN, BREW STRENGTH (Regular/Bold), GRIND (Off/Auto), CLEAN, CLOCK, AUTO OFF (0-4 Hr), BREW/PAUSE.

LCD Display: Shows current time, programming status, "Add Water" or "Add Beans" alerts, and clean indicator.

Grind Selector Dial: Located on the side of the bean hopper. Turn to select grind size from 1 (finest) to 18 (coarsest).

Menu Functions: Use PROGRAM, HOUR, and MIN to set the clock and program the automatic brew time. Use BREW STRENGTH to select coffee intensity. Use GRIND selector to choose between using pre-ground coffee (Off) or grinding whole beans (Auto).

Grinding & Brewing

For optimal freshness, the machine grinds whole beans immediately before brewing.

Prepare: Fill the bean hopper with whole coffee beans. Fill the water reservoir.
Select Grind: Turn the Grind Selector Dial to your preferred setting (e.g., medium: 8-10).
Set Strength: Press BREW STRENGTH to toggle between REGULAR and BOLD.
Set Grind Mode: Ensure the GRIND selector is set to AUTO (light on). Set to OFF only if using pre-ground coffee.
Brew: Place the empty carafe on the warming plate. Press the BREW/PAUSE button to start the cycle. The grinder will activate first, then brewing will begin.
Pause & Serve: Press BREW/PAUSE during brewing to temporarily pause the flow and pour a cup.

Tip: Use 1 level tablespoon of whole beans per cup (5.7 oz) as a starting point. Adjust to taste.

Programming

To set the machine to grind and brew automatically at a specific time.

Set Clock: Press and hold CLOCK. Press HOUR and MIN to set the current time. Press CLOCK again to confirm.
Set Auto Brew Time: Press PROGRAM. The PROGRAM light will blink. Use HOUR and MIN to set the desired brew time. Press PROGRAM again to confirm.
Prepare Machine: Ensure the bean hopper has beans, the water reservoir is full, the carafe is in place, and the GRIND selector is set to AUTO.
Activate: The machine will now automatically grind and brew at the set time. The word "PROGRAM" will appear on the LCD when set.
To Cancel: Press and hold PROGRAM for 3 seconds until the PROGRAM light turns off.

Note: The auto shut-off timer (0-4 Hr) is independent and controls how long the unit stays on after brewing is complete.

Cleaning & Maintenance

Regular cleaning ensures best performance and longevity.

Daily: Discard grounds from the filter basket. Rinse the permanent filter, filter basket, and carafe with warm water.

Weekly/As Needed:

Decalcify: Run a vinegar solution (1 part white vinegar to 2 parts water) through a brew cycle, followed by 2-3 cycles of clear water to rinse. Do this every 2-3 months or as needed if in a hard water area.
Clean Grinder Burrs: Unplug the unit. Remove the bean hopper. Use the provided cleaning brush to remove coffee oils and residue from the burrs and hopper.
Clean Exterior: Wipe the housing with a soft, damp cloth. Do not use abrasive cleaners.

CAUTION! Never immerse the base unit, cord, or plug in water. Unplug before cleaning any part other than the removable carafe and filter basket.

Safety Information

Important safeguards for household use.

Read all instructions before first use.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock, and injury, do not immerse cord, plug, or base unit in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions.
The use of accessory attachments not recommended by Cuisinart may cause injuries.
Do not use outdoors or for commercial purposes.
Do not let cord hang over edge of table or counter, or touch hot surfaces.

Regulatory Information

This appliance has been tested and complies with all applicable standards for safety and electromagnetic compatibility. FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Cuisinart. Cuisinart® is a registered trademark of Conair Corporation. For support, visit www.cuisinart.com or contact Customer Service at 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine does not turn on	No power	Ensure the unit is plugged in. Check outlet. Press POWER button.
No coffee is brewed	Water reservoir empty, clogged filter	Fill reservoir. Check and clean the permanent filter and basket.
Grinder does not operate	Bean hopper empty, GRIND set to OFF	Add whole beans. Ensure GRIND selector is set to AUTO.
Coffee grounds in carafe	Permanent filter misaligned or damaged	Ensure filter is properly seated in the basket. Inspect for damage.
Weak or cold coffee	Incorrect grind, low brew strength, cold carafe	Use a finer grind. Select BOLD strength. Preheat carafe with hot water.
"Add Water" light is on	Low water level	Fill the water reservoir to at least the 2-cup line.
Auto program does not work	Clock not set, program not activated	Set the correct time. Ensure PROGRAM light is on after setting time.
Machine beeps continuously	Carafe not in place, post-brew alert	Place carafe correctly on warming plate. The beep may indicate brew cycle is complete.

Reset: Unplug the unit for 2 minutes, then plug back in to reset the microprocessor.

Service: For repairs, contact Cuisinart Customer Service at 1-800-726-0190 or visit www.cuisinart.com. Do not attempt to repair the unit yourself.