Cuisinart Classic DCC-1100 Manual

The Cuisinart Classic DCC-1100 is a 12-Cup Programmable Coffeemaker featuring a 24-hour advance brew start, 1-4 cup setting, auto shut-off, brew pause, charcoal water filter, and a stainless steel thermal carafe. It includes a permanent gold-tone filter, measuring scoop, and a cleaning kit. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Programming & Operation 8. Safety Features 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-Cup Thermal Carafe, Control Panel with LCD Display, Charcoal Water Filter, Permanent Gold-Tone Filter, Brew Pause, Auto Shut-Off.

Feature	Description
12-Cup Capacity	Brews up to 12 cups (5 oz per cup) of coffee
Programmable Timer	24-hour advance programming for automatic brew start
1-4 Cup Setting	Optimizes brewing for smaller quantities
Auto Shut-Off	Automatically turns off after brewing is complete (0-4 hours adjustable)
Brew Pause	Allows serving a cup before brewing cycle finishes
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee
Stainless Steel Carafe	Thermal carafe keeps coffee hot without a warming plate
Permanent Filter	Gold-tone filter eliminates need for paper filters
LCD Display	Shows time, programming status, and brew settings
Audible Signal	Beeps when brewing is complete

Installation

Unpack and inspect all contents. Place on clean, dry, level surface.

Remove all packaging materials from carafe, filter basket, and coffeemaker.
Wash carafe, filter basket, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert charcoal water filter into filter holder in water reservoir (soak filter first for 15 minutes).
Fill water reservoir with clean, cold water to maximum line (12 cups) and run a brewing cycle without coffee to clean interior.
Plug power cord into 120V AC outlet.

WARNING! Ensure coffeemaker is unplugged during cleaning. Keep away from water sources to prevent electric shock.

First-Time Setup

Set clock and prepare for first use.

Plug in coffeemaker. LCD will flash 12:00.
Press and hold HOUR and MIN buttons to set current time.
Fill water reservoir to desired cup level (using measuring lines).
Insert permanent filter into filter basket. Add ground coffee (1 scoop per cup).
Place empty carafe on warming plate. Close lid.
Press BREW to start manual brewing cycle.

CAUTION! Do not operate without water in reservoir. Ensure carafe is properly seated.

Specifications

Capacity: 12 cups (60 oz).
Carafe: Stainless steel thermal carafe.
Filter: Permanent gold-tone filter; includes charcoal water filter.
Programming: 24-hour programmable timer with memory backup.
Settings: 1-4 cup setting, brew strength control, auto shut-off (0-4 hours).
Power: 120V AC, 60Hz, 900W.
Dimensions: 10.5" H x 8.5" W x 14" D.
Weight: 6.5 lbs.
Warranty: 3-year limited warranty.

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MIN, BREW, AUTO OFF, 1-4 CUP.

Functions: POWER turns display on/off. PROGRAM sets auto-brew time. HOUR/MIN adjust clock and program time. BREW starts manual brewing. AUTO OFF sets auto shut-off duration (0, 2, or 4 hours). 1-4 CUP optimizes brew for small quantities.

LCD Display: Shows current time, program time, auto-off setting, and brew status icons.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Wash carafe, lid, and filter basket with warm, soapy water.
Monthly: Descale with vinegar solution (1 part vinegar to 2 parts water). Run brewing cycle, then rinse with 2 cycles of clean water.
Charcoal Filter: Replace every 60 days or after 60 uses.
Exterior: Wipe with damp cloth. Do not immerse in water.

Tip: Always unplug and cool completely before cleaning.

Programming & Operation

For automatic brewing at set time.

Set Clock: Press and hold HOUR and MIN to set current time.
Set Program Time: Press PROGRAM, then use HOUR/MIN to set desired brew time.
Prepare Coffeemaker: Add water and coffee the night before.
Auto Brew: Coffeemaker will start at programmed time.
Manual Brew: Press BREW to start immediately.
Brew Pause: Press BREW PAUSE during cycle to pour a cup.
Auto Shut-Off: Set duration with AUTO OFF button (0, 2, or 4 hours).

WARNING! Do not remove carafe during brewing except during brew pause feature.

Safety Features

Auto Shut-Off: Turns off heating element after brewing cycle (0-4 hours). Brew Pause: Safely interrupt brewing to serve. Thermal Carafe: No hot warming plate reduces burn risk. Overheat Protection: Automatic cutoff if unit overheats.

Care Instructions

Unplug before cleaning. Use only non-abrasive cleaners. Do not use steel wool or harsh chemicals.

CAUTION! Never immerse coffeemaker, cord, or plug in water. Avoid contact with hot surfaces.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power/LCD dark	Not plugged in / Power outlet issue	Check power cord connection; try different outlet.
Coffee not brewing	Water reservoir empty / Clogged filter	Fill reservoir; clean or replace filter; check for blockages.
Coffee tastes bad	Old coffee / Dirty coffeemaker / Old filter	Use fresh coffee; clean unit; replace charcoal filter.
Leaking water	Improperly seated carafe / Cracked reservoir	Ensure carafe is correctly placed; inspect for damage.
Program time lost	Power interruption	Reset clock and program time after power restore.
Weak coffee	Incorrect coffee-to-water ratio	Use 1 level scoop per cup; adjust to taste.

Reset: Unplug for 10 seconds, then plug back in to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com