cuisinart coffee maker dcc-1220bkswm manual

The Cuisinart DCC-1220BKSWM is a 12-cup programmable coffee maker with a sleek stainless steel design. It features a 24-hour programmability, auto-shutoff (0-4 hours), a brew pause function, a charcoal water filter, a permanent gold-tone filter, and an illuminated on/off switch. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Programming & Operation 8. Care & Safety 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel housing, 12-cup glass carafe, Charcoal water filter, Gold-tone permanent filter, Programmable clock/timer, Brew Pause function.

Feature	Description
Programmable Clock	24-hour digital clock with programmable auto-brew
Auto Shut-Off	Automatically turns off 0 to 4 hours after brewing
Brew Pause	Allows you to pour a cup before brewing is complete
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee
Permanent Filter	Gold-tone filter eliminates the need for paper filters
Illuminated On/Off Switch	Easy-to-see power indicator
Stainless Steel Housing	Durable and easy-to-clean exterior
12-Cup Glass Carafe	Heat-resistant carafe with ergonomic handle
Water Window	Easy-to-read water level indicator
Cord Storage	Wrap excess cord neatly underneath the unit

Installation

Unpack and inspect contents. Place on a clean, dry, level surface away from edges.

Remove all packaging materials and stickers from the unit and carafe.
Wash the carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert the charcoal water filter into the filter holder as per instructions.
Place the empty carafe on the warming plate.
Plug the power cord into a standard 120V AC electrical outlet.

WARNING! Do not immerse the coffee maker base, cord, or plug in water or other liquids. Ensure the unit is on a stable, heat-resistant surface.

First-Time Setup

Before first use, perform a cleaning cycle to remove any manufacturing residues.

Fill the water reservoir to the 12-cup mark with fresh, cold water.
Place the empty carafe with the permanent filter installed onto the warming plate.
Turn the unit ON. The power light will illuminate.
Press the CLEAN button (if equipped) or simply start a brew cycle without coffee.
Allow the full cycle to run, then discard the water. Repeat if necessary.
Set the clock by pressing and holding the HOUR and MIN buttons.

CAUTION! The warming plate and carafe will become hot during use. Handle with care.

Specifications

Model: DCC-1220BKSWM
Capacity: 12 cups (5.7 oz per cup)
Housing: Brushed Stainless Steel
Filter: Permanent Gold-Tone and Charcoal Water Filter
Programmability: 24-hour digital clock with auto-brew
Auto Shut-Off: Programmable from 0 to 4 hours
Special Features: Brew Pause function, Water Window, Cord Storage
Power Source: 120V AC, 60Hz, 900W
Cord Length: Standard length with wrap storage

Controls and Settings

Front Panel Controls: ON/OFF Switch, PROGRAM, HOUR, MIN, AUTO ON, AUTO OFF.

Basic Functions: Press ON/OFF to power the unit. Use HOUR/MIN to set the time. PROGRAM sets the auto-brew time. AUTO ON/OFF sets the auto-shutoff delay (0-4 hrs).

Brewing: Fill reservoir, add coffee to filter, place carafe, press ON. Use Brew Pause by sliding the carafe out slightly (do not remove completely) to pour a cup mid-cycle.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Empty and rinse the carafe and permanent filter. Wipe the warming plate with a damp cloth.
Weekly/Monthly: Descale the unit using a vinegar solution or commercial descaler to remove mineral deposits.
Charcoal Filter: Replace the charcoal water filter every 60 days or after 60 uses, or as indicated by the replacement light.
Exterior: Wipe the stainless steel housing with a soft, damp cloth. Do not use abrasive cleaners.

Tip: Always unplug the unit and allow it to cool completely before cleaning.

Programming & Operation

How to program the auto-brew feature for fresh coffee at a set time.

Set the Clock: Press and hold HOUR and MIN to set the current time.
Set Auto-Brew Time: Press PROGRAM. Use HOUR and MIN to set the desired brew time. Press PROGRAM again to confirm.
Prepare the Night Before: Fill the reservoir with water. Add ground coffee to the permanent filter. Ensure the carafe is correctly positioned.
Activate: Press AUTO ON. The auto-on light will illuminate. The unit will brew at the programmed time.
Auto Shut-Off: Use the AUTO OFF button to select the delay (0, 1, 2, 3, 4 hours) before the unit turns off after brewing.

WARNING! Do not leave coffee warming on the plate for extended periods as it may affect taste. Use the auto-shutoff feature.

Care & Safety

Closed Lid: Always brew with the carafe lid closed. Descaling: Perform regularly to prevent clogging and damage. Filter Replacement: Replace charcoal filter as recommended.

CAUTION! Scalding hazard. The carafe contains hot liquids. Do not touch hot surfaces. Use handles or knobs. This appliance is not intended for use by persons with reduced capabilities.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact customer service at 1-800-726-0190. This product is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee maker won't turn on	No power	Check if plugged in. Check outlet. Ensure ON/OFF switch is pressed.
Water does not flow	Clogged or missing filter	Ensure permanent filter is installed. Descale the unit.
Coffee tastes bad	Old coffee/water, dirty unit	Use fresh, cold water and fresh coffee. Clean carafe and filter. Replace charcoal filter.
Auto-brew doesn't work	Incorrect programming	Verify clock is set correctly. Ensure AUTO ON is activated after programming time.
Leaking water	Overfilled reservoir, cracked carafe	Do not fill past 12-cup mark. Inspect carafe for damage. Ensure all parts are seated correctly.
Clock resets	Power interruption	Reset the time after a power outage. The programmed brew time may need to be reset.

Reset: Unplug the unit for 60 seconds to reset the microprocessor.

Service: 1-800-726-0190; www.cuisinart.com