cuisinart coffee maker grind brew manual

The Cuisinart Coffee Maker Grind & Brew is an automatic coffee maker with a built-in burr grinder, programmable timer, 12-cup capacity, charcoal water filter, gold-tone coffee filter, and automatic shutoff. It features a grind-off option for using pre-ground coffee, a brew pause function, and a cleaning cycle. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning and Maintenance 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Built-in burr grinder, 12-cup glass carafe, Charcoal water filter, Gold-tone permanent filter, Programmable clock/timer, Grind-off switch, Brew pause function, Auto shutoff.

Feature	Description
Burr Grinder	Grinds coffee beans fresh for each brew; adjustable grind size
Programmable Timer	Set brew time up to 24 hours in advance
Grind-Off Switch	Allows use of pre-ground coffee
Brew Pause	Pause brewing to pour a cup before cycle completes
Charcoal Water Filter	Removes impurities for better tasting coffee
Gold-Tone Filter	Permanent, reusable filter included
Auto Shutoff	Turns off heating plate after 0-4 hours (programmable)
Cleaning Cycle	Special cycle to clean internal components
LCD Display	Shows time, program status, and alerts
Water Window	Shows water level for easy filling

Installation

Unpack and inspect contents. Place on a clean, dry, level surface away from edges.

Remove all packaging materials and stickers.
Wash carafe, lid, and gold-tone filter with warm, soapy water. Rinse and dry.
Insert charcoal water filter into filter holder in water reservoir (soak filter first for 15 minutes).
Fill water reservoir completely and run a water-only brewing cycle (without coffee) to clean interior.
Plug into a 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Keep away from heat sources.

First-Time Setup

After initial cleaning cycle, set clock and program preferences.

Set the clock: Press and hold CLOCK button, use HOUR and MIN buttons to set time, press CLOCK again.
Set auto shutoff: Press AUTO OFF button to select 0, 2, or 4 hours.
Program brew time: Press PROGRAM button, set desired brew time using HOUR/MIN, press PROGRAM to confirm.
Adjust grind size: Turn grind selector knob to desired coarseness (fine to coarse).

CAUTION! Ensure unit is on a stable, heat-resistant surface. Do not place on or near a gas or electric burner.

Specifications

Capacity: 12 cups (5.7 oz per cup).
Grinder Type: Built-in conical burr grinder.
Filter: Permanent gold-tone filter; compatible with paper filters.
Water Filter: Charcoal water filter (replace every 60 cycles or 2 months).
Programmability: 24-hour programmable timer.
Auto Shutoff: Programmable (0, 2, or 4 hours).
Power: 120V AC, 60Hz, 1000W.
Dimensions: Standard countertop size.
Materials: Plastic housing, stainless steel accents, glass carafe.

Controls and Settings

Front Panel: POWER button, GRIND OFF switch, PROGRAM button, CLOCK button, HOUR/MIN buttons, AUTO OFF button, CLEAN button.

Display: LCD shows time, program status, "add water" or "clean" alerts.

Grind Settings: Adjustable grind size knob (fine to coarse). Brew Settings: Program start time, auto shutoff duration, brew strength (via grind size and coffee amount). Cleaning: Initiate cleaning cycle via CLEAN button.

Brewing Coffee

For fresh ground coffee or pre-ground.

Fill water reservoir to desired cup level (check water window).
Add whole beans to grinder hopper (up to max line) or place pre-ground coffee in filter basket.
Place gold-tone or paper filter in filter basket.
For pre-ground: Slide GRIND OFF switch to ON position.
Press POWER to turn on. To brew immediately, press BREW NOW. For delayed brew, set PROGRAM time.
Brewing begins automatically (grinder runs first if using whole beans).
Use brew pause function to pour a cup during brewing (do not remove carafe for more than 30 seconds).
When brewing completes, auto shutoff countdown begins (if set).

Tip: Use 1 tablespoon of coffee per cup for regular strength; adjust to taste.

Cleaning and Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Empty and rinse carafe and filter basket. Wipe exterior with damp cloth.
Weekly: Run cleaning cycle (press CLEAN button when unit is off). Use vinegar solution or manufacturer's cleaner.
Monthly: Descale if in hard water area. Run brew cycle with equal parts water and white vinegar, then run 2-3 water-only cycles.
Charcoal filter: Replace every 60 cycles or 2 months.
Grinder cleaning: Unplug, remove bean hopper, wipe with dry cloth. Do not wash burrs.

CAUTION! Unplug before cleaning. Never immerse base in water. Do not use abrasive cleaners.

Safety Features

Auto shutoff: Prevents overheating. Brew pause: Allows safe pouring during cycle. Thermal carafe handle: Stays cool to touch. Ground fault circuit interrupter (GFCI) recommended for outlet.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee maker won't turn on	Power issue	Check plug connection; ensure outlet works; press POWER firmly.
Grinder not working	Grind-off switch/beans	Ensure GRIND OFF is OFF for whole beans; check bean hopper isn't empty.
Weak or slow brew	Clogged filter/grind size	Clean filter basket; check grind not too fine; descale if needed.
Water not heating	Mineral buildup	Run cleaning/descaling cycle; ensure water reservoir filled.
Leaking water	Misaligned components	Ensure carafe is properly placed; check filter basket seated correctly.
Error message on display	Maintenance required	Check manual for specific error code; often indicates need to clean or descale.

Reset: Unplug for 10 minutes, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com