cuisinart coffee maker manual 14 cup

The Cuisinart 14-Cup Coffee Maker is a programmable, automatic drip coffee maker featuring a 14-cup capacity, 24-hour programmability, auto shut-off, brew pause, charcoal water filter, and a stainless steel carafe with ergonomic handle. It includes settings for brew strength, self-cleaning, and a permanent gold-tone filter. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming & Brewing 7. Cleaning & Maintenance 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 14-Cup Glass Carafe, Charcoal Water Filter, Gold-Tone Permanent Filter, Control Panel with LCD Display, Water Reservoir, Warming Plate, and Power Cord.

FeatureDescription
14-Cup CapacityBrews up to 14 cups (6 oz per cup) of coffee
Programmable Timer24-hour advance brew start programming
Auto Shut-OffAutomatically turns off after 0-4 hours (selectable)
Brew PausePause brewing to pour a cup mid-cycle
Brew Strength SelectorChoose Regular or Bold brew strength
Charcoal Water FilterRemoves chlorine and impurities for better taste
Self-Cleaning FunctionCleans internal components with water/vinegar solution
Permanent Gold-Tone FilterReusable filter; no paper filters required
LCD Display with ClockShows time, programming status, and alerts
Stainless Steel CarafeKeeps coffee hot with ergonomic handle

Installation & Setup

Unpack and inspect contents. Place on a clean, dry, level surface away from edges.

  1. Remove all packaging materials from inside and outside the unit.
  2. Wash carafe, lid, and permanent filter with warm, soapy water. Rinse and dry.
  3. Insert the charcoal water filter into the filter holder in the water reservoir (soak filter for 15 minutes first).
  4. Place the empty carafe on the warming plate.
  5. Plug the power cord into a 120V AC outlet.

WARNING! Ensure the unit is on a stable, heat-resistant surface. Keep away from water sources and flammable materials.

First-Time Use

Before first brew, run a cleaning cycle to remove any manufacturing residues.

  1. Fill water reservoir to MAX line with clean water.
  2. Place empty carafe on warming plate.
  3. Press the ON/OFF button to power the unit.
  4. Press and hold the CLEAN button for 3 seconds to start cleaning cycle.
  5. Allow cycle to complete (approx. 30 minutes). Discard water from carafe.
  6. Your coffee maker is now ready for brewing.

CAUTION! Do not add coffee grounds during the cleaning cycle. Ensure carafe is properly seated.

Specifications

Controls and Settings

Control Panel: ON/OFF, PROGRAM, HOUR, MIN, BREW STRENGTH (Regular/Bold), AUTO SHUT-OFF (0-4 hrs), CLEAN, CLOCK.

LCD Display: Shows current time, programming status, "Ready to Brew," "Add Water," and "Clean" indicators.

Settings: Brew Strength (Regular for standard, Bold for richer flavor). Auto Shut-Off (0, 1, 2, 3, 4 hours after brewing). Clock/Program: Set time and program brew start time. Clean: Activates self-cleaning cycle.

Programming & Brewing

To program auto-brew and brew coffee manually.

  1. Set Clock: Press and hold CLOCK, then press HOUR/MIN to set time. Release CLOCK.
  2. Program Auto-Brew: Press PROGRAM, then HOUR/MIN to set brew time. Press PROGRAM again to confirm.
  3. Manual Brew: Fill reservoir with water. Add coffee to filter (1 tbsp per cup). Place carafe. Press ON/OFF to start brewing.
  4. Brew Pause: Press BREW PAUSE during brewing to pour a cup. Press again to resume.
  5. Brew Strength: Press BREW STRENGTH before brewing to select Regular or Bold.

Tip: For optimal taste, use filtered water and replace charcoal filter every 60 cycles or 2 months.

Cleaning & Maintenance

Regular cleaning ensures performance and longevity.

  1. Daily: Wash carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
  2. Monthly: Run self-cleaning cycle: Fill reservoir with equal parts water and white vinegar. Press and hold CLEAN for 3 seconds. After cycle, run two cycles with clean water to rinse.
  3. Descaling: If in hard water area, descale every 1-3 months using vinegar solution or commercial descaler.
  4. Exterior: Wipe with damp cloth. Do not immerse in water.
  5. Charcoal Filter: Replace every 60 cycles or every 2 months.

WARNING! Unplug before cleaning. Never use abrasive cleaners or scouring pads.

Safety Features

Auto Shut-Off: Turns warming plate off after selected time (0-4 hrs). Brew Pause: Safely pour coffee during brew cycle. Overheat Protection: Automatic shut-off if overheating detected.

Regulatory Information

UL Listed: Complies with UL standard 1082. FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

SymptomPossible CauseCorrective Action
No power/LCD darkNot plugged in / outlet issueEnsure plug is secure; try different outlet; check circuit breaker.
Coffee not brewingWater reservoir empty / clogFill reservoir; check for clogs in filter or spray head.
Coffee tastes badOld grounds / dirty carafe / old filterUse fresh grounds; clean carafe and filter; replace charcoal filter.
Auto-brew not workingProgram not set / clock wrongRe-program brew time; ensure clock is set correctly.
Leaking waterCarafe not seated / overfilledEnsure carafe is properly placed; do not exceed MAX fill line.
Brew pause not workingCarafe removed too longReplace carafe within 20 seconds to resume brewing.

Reset: Unplug for 10 minutes, then plug back in to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com

Cuisinart Coffee Maker Manual 14 Cup © - All Rights Reserved 2025