cuisinart coffee maker manual dcc 3200

The Cuisinart DCC-3200 is a 14-cup programmable coffeemaker with a thermal carafe, featuring a 24-hour programmability, auto-shutoff (0-4 hours), brew pause, charcoal water filter, self-cleaning function, and adjustable keep-warm temperature. It includes a stainless steel thermal carafe, gold-tone coffee filter, charcoal water filter, and measuring scoop. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming & Operation 7. Cleaning & Maintenance 8. Care Instructions 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Thermal Carafe, Control Panel with LCD Display, Charcoal Water Filter, Gold-Tone Permanent Filter, Water Reservoir, Brew Basket.

FeatureDescription
Thermal CarafeStainless steel, double-wall insulated to keep coffee hot for hours
Programmable Timer24-hour advance programming for automatic brew start
Auto Shut-OffAutomatically turns off 0 to 4 hours after brewing (selectable)
Brew PausePause brewing to pour a cup before cycle completes
Charcoal Water FilterRemoves chlorine and impurities for better tasting coffee
Adjustable Keep-WarmSelectable temperature setting (Low/High)
Self-CleaningOne-touch cleaning cycle for easy maintenance
LCD DisplayShows time, programming status, and alerts
Audible SignalBeeps when programming is complete and coffee is ready
Cord StorageWrap excess cord in base for neat countertop storage

Installation & Setup

Unpack and inspect all contents. Place on a clean, dry, level surface away from edges.

  1. Insert Charcoal Filter: Soak filter in water for 15 minutes, then place in water reservoir holder.
  2. Prepare Carafe: Wash carafe, lid, and filter basket with warm, soapy water. Rinse thoroughly.
  3. Prime the System: Fill water reservoir to max line with cold water and run a brewing cycle without coffee to clean interior.
  4. Set the Clock: Plug in unit. Press and hold HOUR and MINUTE buttons to set current time.

WARNING! Do not immerse base, cord, or plug in water or other liquids. Ensure carafe lid is securely closed before pouring.

First-Time Use

After initial setup, you are ready to brew coffee.

  1. Fill Water Reservoir: Lift lid and add cold water to desired cup level (1-14 cups).
  2. Add Coffee: Place filter in basket. Add ground coffee (1 tablespoon per cup).
  3. Start Brewing: Place carafe on warming plate. Press BREW button to start immediate brewing.
  4. Program for Later: Use PROGRAM button to set automatic brew time (see Programming section).

CAUTION! Use only cold water. Do not use without water or coffee grounds in filter basket.

Specifications

Controls and Settings

Control Panel: POWER button, BREW button, PROGRAM button, HOUR/MINUTE buttons, AUTO OFF button, CLEAN button.

LCD Display: Shows time, programming icon, auto-off setting, and clean indicator.

Settings: Clock set (hold HOUR/MINUTE). Auto Off (press AUTO OFF to cycle through 0-4 hr options). Keep-Warm Temperature (press and hold BREW for 5 sec to toggle Low/High). Program (set brew time in advance). Clean (initiates self-cleaning cycle).

Programming & Operation

To program automatic brew start:

  1. Set Current Time: Ensure clock displays correct time.
  2. Set Brew Time: Press PROGRAM. Use HOUR/MINUTE to set desired start time.
  3. Confirm: Press PROGRAM again. "Program" icon will appear on display.
  4. Prepare in Advance: Add water and coffee grounds to unit the night before.
  5. Auto Brew: Unit will start brewing at set time. "Auto" icon lights during brew.

Tip: Use brew pause feature to pour a cup during brewing cycle. Replace carafe within 30 seconds to continue brewing.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

  1. Daily: Empty and rinse carafe and filter basket after each use.
  2. Weekly: Clean water reservoir and remove/rinse charcoal filter.
  3. Monthly: Run self-cleaning cycle (press CLEAN button when unit is off).
  4. Descaling: Run vinegar solution through brewing cycle every 3-6 months to remove mineral deposits.

WARNING! Unplug unit before cleaning. Do not use abrasive cleaners or scouring pads on any surface.

Care Instructions

Exterior: Wipe with damp cloth. Do not use harsh chemicals. Carafe: Hand wash only; not dishwasher safe. Filter: Replace charcoal filter every 60 brew cycles or 2 months. Permanent filter: Clean with soft brush.

CAUTION! Never immerse base in water. Do not place carafe on stove or in microwave.

Warranty Information

Cuisinart provides a 3-year limited warranty on the DCC-3200. Warranty covers defects in materials and workmanship under normal household use. For service, retain original receipt and contact Cuisinart Customer Service at 1-800-726-0190 or visit www.cuisinart.com. Copyright © Cuisinart. Trademarks owned by Conair Corporation.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit won't turn onNo powerCheck outlet; ensure cord is plugged in securely.
Coffee doesn't brewNo water/programming errorFill water reservoir; check if programmed correctly; press BREW.
Coffee tastes badOld filter/groundsReplace charcoal filter; use fresh coffee; clean unit.
Carafe leaksLid not secure/crackEnsure lid is tightly closed; inspect for cracks; replace if damaged.
Display flashingCleaning reminder/errorRun cleaning cycle; unplug for 10 minutes then restart.
Slow brewingMineral buildupDescale with vinegar solution; clean water reservoir.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-726-0190; www.cuisinart.com

Cuisinart Coffee Maker DCC-3200 Manual © - All Rights Reserved 2025