cuisinart coffee maker manual ss-15

The Cuisinart SS-15 is a 12-cup programmable coffee maker with a stainless steel carafe, 24-hour programmability, auto shut-off, brew pause feature, charcoal water filter, and adjustable warming plate. It features a digital clock, easy-view water window, and a permanent gold-tone filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Stainless steel carafe, Charcoal water filter, Permanent gold-tone filter, Digital clock with programmable timer, Brew pause feature, Adjustable warming plate.

Installation

Unpack and inspect contents. Place on clean, dry, level surface away from edges.

1. Remove all packaging materials and stickers.
2. Wash carafe, lid, and permanent filter with warm soapy water; rinse thoroughly.
3. Insert charcoal water filter into filter holder (soak filter 15 minutes first).
4. Place empty carafe on warming plate.
5. Plug into 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Ensure hands are dry when handling plug.

First-Time Setup

Before first use, perform a cleaning brew cycle.

1. Fill water reservoir to 12-cup line with fresh cold water.
2. Place empty carafe on warming plate.
3. Press ON/OFF to start brewing cycle (no coffee grounds).
4. Discard water after cycle completes.
5. Set clock time: Hold CLOCK button, press HOUR and MINUTE to set.

CAUTION! Do not use without water. Ensure carafe is properly positioned.

Specifications

• Capacity: 12 cups (60 oz).
• Carafe Material: Stainless steel.
• Filter: Permanent gold-tone filter; includes charcoal water filter.
• Programmability: 24-hour digital clock with auto brew.
• Features: Brew pause, auto shut-off, adjustable warming plate.
• Power: 120V AC, 60Hz, 900W.
• Dimensions: Standard countertop size.
• Warranty: Limited 3-year warranty.

Controls and Settings

Front Panel: ON/OFF, PROGRAM, HOUR, MINUTE, CLOCK, WARMING PLATE (High/Low/Off).

Display: Digital clock, PROGRAM indicator, AUTO ON indicator.

Clock Setting: Hold CLOCK, adjust HOUR/MINUTE. Warming Plate: Press WARMING PLATE to cycle High > Low > Off. Program: Set auto brew time with PROGRAM, HOUR, MINUTE buttons.

Brewing Coffee

For best results, use fresh cold water and medium grind coffee.

1. Fill water reservoir to desired cup level.
2. Place permanent filter in filter holder; add coffee grounds (1 tbsp per cup).
3. Place empty carafe on warming plate; close lid.
4. Press ON/OFF to start brewing.
5. Use brew pause feature to pour a cup during brewing.
6. After brewing, auto shut-off turns off heating element.
7. Adjust warming plate to keep coffee at desired temperature.

Tip: Replace charcoal water filter every 60 cycles or 2 months.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

1. Daily: Wash carafe, lid, and permanent filter with warm soapy water.
2. Monthly: Descale with vinegar solution (run brew cycle with equal parts vinegar and water, then run 2 cycles with clean water).
3. Exterior: Wipe with damp cloth; do not use abrasive cleaners.
4. Charcoal Filter: Replace every 60 cycles or when indicator light appears.

CAUTION! Unplug before cleaning. Never immerse base in water.

Programming

Set auto brew to wake up to fresh coffee.

1. Ensure clock is set correctly.
2. Press PROGRAM; PROGRAM indicator flashes.
3. Press HOUR and MINUTE to set desired brew time.
4. Press PROGRAM again to confirm; AUTO ON indicator lights.
5. Add water and coffee grounds the night before.
6. Machine will automatically brew at set time.

To cancel program: Press and hold PROGRAM for 3 seconds.

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. This appliance is for household use only.

Troubleshooting

Reset: Unplug for 1 minute, then plug back in to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com