cuisinart coffee maker ss 10 manual

The Cuisinart SS-10 Coffee Maker is a 10-cup programmable coffee maker with a stainless steel thermal carafe, 24-hour programmability, auto shut-off, brew pause feature, charcoal water filter, and adjustable brew strength. It features a sleek stainless steel design, easy-to-read LCD display, and intuitive controls for brewing perfect coffee. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programmable Features 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel thermal carafe, Charcoal water filter, LCD display, Programmable clock, Brew strength selector, Brew pause feature.

FeatureDescription
Stainless Steel Carafe10-cup thermal carafe keeps coffee hot for hours
Programmable Timer24-hour advance brew start programming
Auto Shut-OffAutomatically turns off after brewing is complete
Brew PausePause brewing to pour a cup before cycle finishes
Charcoal Water FilterRemoves chlorine and impurities for better tasting coffee
Brew Strength SelectorChoose between regular and bold brew strength
LCD DisplayShows time, programming status, and alerts
Water WindowEasy-to-view water level indicator
Audible AlertBeeps when brewing is complete
Power Cord StorageWrap excess cord in base compartment

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

  1. Remove all packaging materials from inside and outside the unit.
  2. Wash carafe lid and filter basket with warm, soapy water; rinse thoroughly.
  3. Insert charcoal water filter into filter holder (soak filter first for 15 minutes).
  4. Place empty carafe on warming plate.
  5. Plug into 120V AC outlet.

WARNING! Do not immerse coffee maker, cord, or plug in water. Keep away from heat sources.

First-Time Setup

Before first use, run a brewing cycle with water only to clean the system.

  1. Fill water reservoir with clean water to MAX line.
  2. Place empty carafe on warming plate.
  3. Press PROGRAM button to set current time.
  4. Press BREW button to start cleaning cycle.
  5. Discard water after cycle completes.
  6. Repeat cleaning cycle if desired.

CAUTION! Use only cold water. Do not use without water in reservoir.

Specifications

Controls and Settings

Front Panel Controls: POWER, PROGRAM, HOUR, MINUTE, BREW STRENGTH, BREW, CLOCK.

Display Indicators: Time, PROGRAM, AUTO ON, AUTO OFF, BOLD, CLEAN.

Settings: Time setting (PROGRAM + HOUR/MINUTE), Program brew start (PROGRAM + time), Brew strength (BREW STRENGTH button), Auto shut-off (default 0-4 hours adjustable).

Brewing Coffee

For best results, use fresh cold water and medium grind coffee.

  1. Fill water reservoir to desired level (MIN to MAX marks).
  2. Insert charcoal water filter (if using).
  3. Place paper filter in filter basket (or use permanent filter).
  4. Add coffee grounds (1 tablespoon per cup).
  5. Place empty carafe on warming plate.
  6. Select brew strength (REGULAR or BOLD).
  7. Press BREW button to start brewing.
  8. Use brew pause feature if needed during brewing.

Tip: For optimal flavor, use filtered water and clean machine regularly.

Cleaning & Maintenance

Regular cleaning ensures best performance and coffee flavor.

  1. Daily: Empty and rinse carafe after each use.
  2. Weekly: Clean filter basket and carafe lid with warm soapy water.
  3. Monthly: Descale with vinegar solution (1 part vinegar to 2 parts water).
  4. Filter Replacement: Change charcoal water filter every 60 brew cycles or 2 months.
  5. Exterior: Wipe with damp cloth; do not use abrasive cleaners.

WARNING! Unplug before cleaning. Never immerse unit in water.

Programmable Features

Set the coffee maker to brew automatically at a specific time.

  1. Press PROGRAM button.
  2. Use HOUR and MINUTE buttons to set desired brew time.
  3. Press PROGRAM again to confirm.
  4. AUTO ON indicator will light when programmed.
  5. Ensure water reservoir is filled and coffee grounds are loaded.
  6. Machine will automatically brew at set time.

Note: To cancel programmed brew, press and hold PROGRAM for 3 seconds.

Care & Storage

Unplug and allow to cool completely before storing. Store in dry place.

CAUTION! Do not wrap cord tightly around base; use cord storage compartment.

Regulatory Information

UL Listed. FCC Part 15 compliant. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. This appliance is for household use only.

Troubleshooting

SymptomPossible CauseCorrective Action
Coffee maker won't turn onPower cord not plugged inCheck power outlet and cord connection
No brewing actionWater reservoir emptyFill reservoir with water to MIN line
Coffee tastes badOld coffee grounds or dirty machineUse fresh coffee; clean machine thoroughly
Leaking waterImproperly placed filter or carafeEnsure filter basket and carafe are properly positioned
Programmed brew doesn't startTime not set correctlyReset time and reprogram
Weak coffeeInsufficient coffee groundsUse more coffee or select BOLD setting
Carafe doesn't keep coffee hotLid not properly sealedEnsure lid is securely closed

Reset: Unplug for 30 seconds, then replug to reset electronics.

Service: 1-800-726-0190; www.cuisinart.com

Cuisinart Coffee Maker SS-10 Manual © - All Rights Reserved 2025