Cuisinart Coffee On Demand DCC-3000P1 Manual

The Cuisinart Coffee On Demand DCC-3000P1 is a programmable 12-cup coffeemaker with a thermal carafe, 24-hour programmability, auto shut-off, self-clean function, adjustable brew strength, and a charcoal water filter. It features a digital clock, brew pause, and a 1-4 cup setting for optimal flavor. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Programming & Operation 8. Troubleshooting 9. Warranty Information

Features at a Glance

Key components: Thermal Carafe, Charcoal Water Filter, Digital Control Panel, Water Reservoir, Brew Basket, Warming Plate.

Feature	Description
Thermal Carafe	Stainless steel, vacuum-insulated to keep coffee hot for hours
Programmable Timer	Set brew time up to 24 hours in advance
Auto Shut-Off	Automatically turns off after brewing (0-4 hours selectable)
Self-Clean Function	Indicator light prompts for cleaning cycle
Adjustable Brew Strength	Select Regular or Bold flavor
1-4 Cup Setting	Optimizes brewing for smaller amounts
Brew Pause	Pause brewing to pour a cup before cycle finishes
Charcoal Water Filter	Removes impurities for better tasting coffee
Digital Clock	Displays time and program settings
Audible Signal	Beeps when brewing is complete

Installation

Unpack and inspect contents. Place on a clean, dry, level surface away from edges.

Remove all packaging materials from inside and outside the unit.
Wash the carafe, lid, brew basket, and charcoal water filter holder with warm, soapy water. Rinse and dry thoroughly.
Insert the charcoal water filter into the filter holder and place it in the water reservoir.
Fill the water reservoir completely with cold water and run a brewing cycle without coffee to clean the internal system. Discard this water.

WARNING! Do not immerse the base, cord, or plug in water or any other liquid. Ensure the unit is unplugged during cleaning.

First-Time Setup

Plug the coffeemaker into a standard 120V AC outlet. The digital display will light up.

Set the Clock: Press and hold the HOUR and MIN buttons to set the current time.
Prime the Filter: Soak the charcoal water filter in cold water for 15 minutes, then rinse under cold water.
Program Auto Brew: Press the PROGRAM button, then use HOUR/MIN to set the desired brew time. Press PROGRAM again to confirm.
Select Brew Strength: Press the STRENGTH button to toggle between REGULAR and BOLD.

CAUTION! Place the carafe securely on the warming plate before starting any brew cycle.

Specifications

Capacity: 12 cups (60 oz).
Carafe: Stainless steel thermal, vacuum-insulated.
Power: 120V AC, 60Hz, 900W.
Programmability: 24-hour advance brew start.
Auto Shut-Off: 0 to 4 hours (selectable).
Special Features: Self-clean indicator, brew strength selector, 1-4 cup setting, brew pause.
Filter: Permanent gold-tone filter; includes charcoal water filter.
Dimensions: Approximately 11.5" W x 8.5" D x 14" H.
Warranty: 3-year limited warranty.

Controls and Settings

Access functions via the digital control panel. Front Panel: POWER, PROGRAM, HOUR, MIN, CLOCK, STRENGTH, AUTO OFF, CLEAN.

Button Functions: POWER turns unit on/off. PROGRAM sets auto brew time. HOUR/MIN adjust time. CLOCK sets current time. STRENGTH selects Regular or Bold brew. AUTO OFF sets auto shut-off delay (0-4 hrs). CLEAN initiates cleaning cycle.

Settings: Brew Strength (Regular/Bold), Auto Shut-Off (0, 1, 2, 4 hours), Clock Format (12/24 hr), Clean Indicator (flashes when descaling needed).

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Empty and rinse the carafe and brew basket after each use.
Weekly: Wash removable parts (carafe, lid, filter basket) with warm, soapy water.
Monthly: Replace the charcoal water filter. Run a cleaning cycle with a descaling solution (vinegar or commercial descaler).
Self-Clean Cycle: When the CLEAN light flashes, press and hold the CLEAN button for 3 seconds to start the cycle. Run with a full reservoir of clean water afterward.

Tip: Never use abrasive cleaners or scouring pads on any part of the coffeemaker.

Programming & Operation

Supports manual brewing, programmed brewing, and brew strength adjustment.

Manual Brew: Add water to reservoir, add coffee to filter, place carafe, press POWER, then press BREW.
Program Brew: Set clock. Press PROGRAM, set brew time with HOUR/MIN, press PROGRAM to confirm. Add water and coffee the night before.
Brew Pause: Press PAUSE during brewing to pour a cup early. Press again to resume.
1-4 Cup Setting: For 1-4 cups, press the 1-4 CUP button before brewing for optimal extraction.
Auto Shut-Off: Press AUTO OFF to cycle through delay options (0, 1, 2, 4 hours).

WARNING! Do not remove the carafe during brewing unless using the Brew Pause feature, as hot liquid may spill.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	No power	Ensure plug is securely in outlet; check circuit breaker.
Coffee tastes bad	Old filter/coffee	Replace charcoal water filter; use fresh coffee; clean unit.
Auto brew doesn't start	Program not set/clock wrong	Verify clock time; ensure PROGRAM was confirmed; add water/coffee.
Leaking water	Misaligned parts	Ensure carafe is seated properly; check filter basket is locked in place.
CLEAN light flashing	Descaling needed	Run cleaning cycle with descaling solution.
Weak coffee	Incorrect grind/strength setting	Use medium grind; select BOLD strength setting.

Reset: Unplug for 10 minutes to reset the control panel.

Service: 1-800-726-0190; www.cuisinart.com

Warranty Information

Cuisinart offers a 3-year limited warranty on the DCC-3000P1 against defects in materials or workmanship. Warranty applies to original purchaser with proof of purchase. Does not cover commercial use, damage from misuse, or normal wear. For warranty service, contact Cuisinart Customer Service. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190.