Cuisinart DCC-1000R Programmable 12 Cup Coffee Maker Manual

The Cuisinart DCC-1000R is a fully programmable 12-cup coffee maker featuring a 24-hour advance brew start, auto shut-off, self-cleaning function, and a charcoal water filter. It includes a stainless steel carafe with ergonomic handle, a brew pause feature, and a 1-4 cup setting for optimal flavor. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming Instructions 7. Brewing Coffee 8. Cleaning & Maintenance 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: 12-Cup Glass Carafe, Charcoal Water Filter, Removable Filter Basket, Control Panel with LCD Display, Power Base with Cord Storage.

FeatureDescription
Programmable TimerSet brew time up to 24 hours in advance
Auto Shut-OffAutomatically turns off after brewing (0-4 hours adjustable)
Brew Pause & ServePause brewing to pour a cup before cycle completes
1-4 Cup SettingAdjusts brewing strength for smaller batches
Self-Cleaning FunctionCleans mineral deposits with vinegar solution
Charcoal Water FilterRemoves chlorine and impurities for better taste
LCD DisplayShows time, programming status, and alerts
Stainless Steel CarafeKeeps coffee hot with ergonomic handle
Cord StorageBuilt-in compartment to manage power cord
Audible SignalBeeps when brewing is complete

Installation & Setup

Unpack and inspect all components. Place on a clean, dry, level surface away from edges.

  1. Insert Charcoal Filter: Soak filter in water for 15 minutes, then place in filter holder.
  2. Attach Filter Basket: Place removable filter basket into the brew basket area.
  3. Position Carafe: Ensure carafe is centered on warming plate.
  4. Plug into 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Keep away from heat sources.

First-Time Use

Before first brew, run a cleaning cycle with water only.

  1. Fill water reservoir to 12-cup line with fresh cold water.
  2. Place empty carafe on warming plate.
  3. Press PROGRAM to set clock to current time.
  4. Press CLEAN to run a water-only brew cycle (no coffee).
  5. Discard water from carafe after cycle completes.

CAUTION! Ensure carafe is properly seated to avoid spills and burns.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MINUTE, AUTO ON, AUTO OFF, CLEAN, 1-4 CUP.

LCD Display: Shows current time, programmed brew time, auto-off countdown, and cleaning indicator.

Settings: Clock (12/24 hour format), Auto Shut-Off (0, 1, 2, 3, 4 hours), Brew Strength (1-4 cup setting). Programming: Set brew time using PROGRAM, HOUR, MINUTE buttons. Auto On/Off: Schedule brew start and automatic shut-off.

Programming Instructions

To program brew time in advance:

  1. Press and hold PROGRAM until "SET" appears.
  2. Press HOUR and MINUTE to set desired brew time.
  3. Press PROGRAM again to confirm.
  4. "AUTO ON" will illuminate when programmed.

To set Auto Shut-Off:

  1. Press AUTO OFF repeatedly to cycle through 0, 1, 2, 3, 4 hours.
  2. Selected time will display briefly.

Tip: Ensure clock is set correctly for accurate programming.

Brewing Coffee

For optimal flavor, use fresh cold water and medium grind coffee.

  1. Fill water reservoir to desired cup level (1-12).
  2. Insert paper or permanent filter into basket.
  3. Add coffee: 1 tablespoon per cup (adjust to taste).
  4. Place carafe on warming plate.
  5. Press POWER to start immediate brew, or wait for programmed time.
  6. Use BREW PAUSE to pour a cup during brewing.
  7. When cycle completes, audible signal will sound.

WARNING! Do not remove carafe during full brewing cycle except during pause feature.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Empty and rinse carafe and filter basket. Wipe exterior with damp cloth.

Monthly: Run self-cleaning cycle with vinegar solution:

  1. Fill reservoir with equal parts water and white vinegar.
  2. Place empty carafe on warming plate.
  3. Press CLEAN button; cycle runs for 30 minutes.
  4. Rinse by running two cycles with fresh water only.

Filter Replacement: Replace charcoal water filter every 60 brew cycles or 2 months.

CAUTION! Unplug before cleaning. Never use abrasive cleaners.

Safety Information

UL Listed. For household use only. Keep out of reach of children. Do not operate without water in reservoir. Use only cold water. Do not use cracked carafe. Unplug when not in use for extended periods.

Warranty & Support

Cuisinart offers a 3-year limited warranty against defects in materials and workmanship. Register product online at www.cuisinart.com. For customer service, call 1-800-726-0190 or visit support.cuisinart.com. Keep original receipt for warranty claims.

Troubleshooting

SymptomPossible CauseCorrective Action
Coffee maker won't turn onNo powerCheck outlet; ensure plug is fully inserted; press POWER firmly.
Water doesn't brewClogged filter/water linesRun cleaning cycle; ensure filter basket is properly seated.
Coffee tastes badOld filter/mineral buildupReplace charcoal filter; run cleaning cycle; use fresh coffee.
Auto program not workingClock not setSet correct time; ensure "AUTO ON" is illuminated.
Leaking waterMisaligned carafeEnsure carafe is centered; check for cracks in carafe or reservoir.
LCD display blankPower interruptionUnplug for 1 minute, then plug back in; reset clock.

Reset: Unplug for 10 minutes to reset all programming.

Service: 1-800-726-0190; support.cuisinart.com

Cuisinart DCC-1000R Programmable 12 Cup Coffee Maker Manual © - All Rights Reserved 2025