The Cuisinart DCC-1100BKP1 is a 12-cup programmable coffeemaker with a sleek black stainless steel finish. It features a 24-hour programmability, auto shut-off, a 1-4 cup setting for optimal brewing of smaller batches, a charcoal water filter, and a cleaning indicator. It includes a stainless steel carafe with an ergonomic handle and dripless pour spout. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Main unit with control panel, Glass carafe with lid, Charcoal water filter, Measuring scoop, Instruction manual.
| Feature | Description |
|---|---|
| 12-Cup Capacity | Brews up to 12 cups (5 oz per cup) of coffee |
| 24-Hour Programmability | Set brew time in advance for automatic start |
| Auto Shut-Off | Automatically turns off after brewing is complete (0-4 hours) |
| 1-4 Cup Setting | Optimizes brewing for 1 to 4 cups for full flavor |
| Charcoal Water Filter | Removes chlorine and impurities for better tasting coffee |
| Cleaning Indicator | Light alerts when it's time to clean the coffeemaker |
| Stainless Steel Carafe | Keeps coffee hot with dripless pour spout |
| Brew Pause | Allows you to pour a cup before brewing is finished |
| Power On/Off Button | Turns the coffeemaker on and off |
| Program Button | Sets the clock and programming time |
Unpack and inspect all contents. Place on a clean, dry, level, and heat-resistant surface.
WARNING! Do not immerse the base unit, cord, or plug in water or any other liquid. Ensure the carafe is properly seated on the warming plate before brewing.
Before first use, perform a cleaning cycle with water only (no coffee).
CAUTION! The warming plate and carafe will become hot during operation. Handle with care using the handle.
Control Panel: ON/OFF, PROGRAM, HOUR, MIN, AUTO ON, AUTO OFF, 1-4 CUP, CLEAN.
Basic Functions: Press ON/OFF to start manual brewing. Use PROGRAM to set clock and program start time. HOUR/MIN adjust time. AUTO ON sets programmed brew time. AUTO OFF sets auto shut-off delay (0-4 hours). 1-4 CUP button activates small batch setting. CLEAN indicator light turns on when descaling is needed.
Programming Brew Time: With clock set, press and hold AUTO ON. Use HOUR/MIN to set desired brew time. Release AUTO ON. The "AUTO ON" light will illuminate. The coffeemaker will brew at the set time.
For optimal coffee flavor, use fresh, cold water and grind coffee beans just before brewing.
Tip: For programmed brewing, set the AUTO ON time the night before. Always use the charcoal filter for better tasting coffee.
Regular cleaning ensures optimal performance and longevity.
Daily: Discard used grounds and filter. Wash carafe and lid with warm, soapy water. Wipe exterior with a damp cloth.
Descaling (When CLEAN light is on):
Charcoal Filter Replacement: Replace every 60 brew cycles or 2 months. Soak new filter 15 minutes, then insert into holder.
CAUTION! Never use abrasive cleaners or scouring pads. Unplug before cleaning. Do not immerse base in water.
This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact customer service at 1-800-726-0190.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Coffeemaker won't turn on | No power | Check if plugged in; ensure outlet is working; press ON/OFF firmly. |
| Water doesn't brew | Clogged filter/water path | Ensure filter is properly placed; descale the unit; check for blockages. |
| Coffee tastes bad | Old coffee/water/dirty unit | Use fresh coffee and cold water; clean carafe and basket; replace charcoal filter. |
| Auto On doesn't work | Incorrect time set | Ensure clock is set correctly and AM/PM is right; reprogram AUTO ON. |
| Clean light is on | Mineral buildup | Descale the coffeemaker following cleaning instructions. |
| Leaking water | Carafe not seated/filter issue | Ensure carafe is properly placed; check filter basket alignment; do not overfill. |
Reset: Unplug for 10 minutes, then plug back in to reset electronics.
Service: 1-800-726-0190; www.cuisinart.com