Cuisinart DCC-1120C Series Manual

The Cuisinart DCC-1120C Series is a programmable 12-cup coffeemaker featuring a 24-hour advance brew start, auto shut-off, self-cleaning function, charcoal water filter, and a stainless steel thermal carafe. It includes a permanent gold-tone filter, brew pause feature, and illuminated on/off button. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming Guide 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel thermal carafe, Charcoal water filter, Permanent gold-tone filter, Programmable timer, Auto shut-off, Brew pause feature.

Feature	Description
Carafe	12-cup stainless steel thermal carafe with lid
Water Filter	Charcoal water filter for improved taste
Coffee Filter	Permanent gold-tone filter (no paper filters needed)
Programmable Timer	24-hour advance brew start
Auto Shut-Off	Automatically turns off after brewing (0-4 hours)
Brew Pause	Pause brewing to pour a cup
Self-Cleaning	One-touch cleaning cycle
Illuminated Controls	Easy-to-read display and buttons
Power	120V AC, 60Hz
Warranty	3-year limited warranty

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from coffeemaker and carafe.
Wash carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert charcoal water filter into filter holder (soak filter 15 minutes first).
Place empty carafe on warming plate.
Plug power cord into 120V AC outlet.

WARNING! Do not immerse coffeemaker base, cord, or plug in water. Keep away from heat sources.

First-Time Setup

Before first use, run a cleaning cycle.

Fill water reservoir with clean water to MAX line (12 cups).
Place empty carafe on warming plate.
Press and hold CLEAN button for 3 seconds to start cleaning cycle.
After cycle completes, discard water from carafe.
Repeat cleaning cycle once more with fresh water.
Your coffeemaker is now ready for brewing.

CAUTION! Ensure carafe is properly seated on warming plate before brewing.

Specifications

Capacity: 12 cups (5.7 oz per cup).
Carafe: Stainless steel thermal, double-wall insulation.
Filters: Permanent gold-tone filter; charcoal water filter included.
Programming: 24-hour advance brew start.
Auto Shut-Off: Programmable 0-4 hours after brewing.
Special Features: Brew pause, self-cleaning function, illuminated display.
Power Source: 120V AC, 60Hz, 900W.
Dimensions: 10.5" W x 14.5" H x 8.25" D.
Weight: 6.5 lbs.

Controls and Settings

Front Panel: ON/OFF button, PROGRAM button, HOUR and MIN buttons, CLEAN button, AUTO OFF button.

Display: Shows time, program status, auto-off setting, and clean indicator.

Programming: Set clock using HOUR/MIN buttons. Program brew start time using PROGRAM button. Auto Off: Set 0-4 hours using AUTO OFF button. Clean: Press CLEAN to start cleaning cycle. Brew Pause: Press BREW PAUSE during brewing to pour a cup.

Brewing Coffee

For best results, use fresh cold water and medium grind coffee.

Fill water reservoir with desired amount of water.
Insert permanent filter into filter basket.
Add coffee grounds (1 tablespoon per cup).
Place empty carafe on warming plate.
Press ON/OFF to start brewing immediately.
For programmed brewing: Set brew time using PROGRAM button.
Use BREW PAUSE feature to pour a cup during brewing.
Auto shut-off will turn off warming plate after set time.

Tip: Replace charcoal water filter every 60 brew cycles or 2 months.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Wash carafe, lid, and permanent filter with warm, soapy water.
Weekly: Run cleaning cycle (press CLEAN button).
Monthly: Descale with vinegar solution (1 part vinegar to 2 parts water).
Filter Replacement: Replace charcoal water filter every 60 cycles.
Exterior: Wipe with damp cloth; never immerse in water.

WARNING! Unplug before cleaning. Never use abrasive cleaners.

Programming Guide

Setting the clock and programming brew times.

Set Clock: Press and hold HOUR button to set hour, MIN button to set minutes.
Program Brew Time: Press PROGRAM, then use HOUR/MIN to set desired brew time.
Confirm: Press PROGRAM again to confirm setting.
Auto Off: Press AUTO OFF repeatedly to cycle through 0, 2, or 4-hour settings.
To Cancel Program: Press and hold PROGRAM for 3 seconds.

Note: "PROG" icon appears on display when programmed brew is set.

Care Instructions

Proper care extends the life of your coffeemaker.

Always use the provided charcoal water filter for better tasting coffee.
Use medium grind coffee; fine grind may clog the filter.
Never operate without water in the reservoir.
Always have carafe in place before brewing.
Store in a dry place when not in use.

CAUTION! Do not use cracked carafe. Replace immediately if damaged.

Regulatory Information

UL listed. FCC Part 15 compliant. This device complies with Part 15 of the FCC Rules. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. Register your product online for warranty validation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	Power source/plug	Check power outlet; ensure plug is secure; try different outlet.
No brewing occurs	Water reservoir/programming	Ensure water in reservoir; check if programmed correctly; press ON/OFF.
Coffee tastes bad	Old filter/coffee/water	Replace charcoal filter; use fresh coffee; clean coffeemaker.
Leaking water	Improper assembly	Ensure all parts properly seated; check filter basket placement.
Display not working	Power interruption	Unplug for 10 minutes; plug back in; reset clock.
Slow brewing	Mineral buildup	Descale with vinegar solution; run cleaning cycle.

Reset: Unplug for 10 minutes to reset all programming.

Service: 1-800-726-0190; www.cuisinart.com