Cuisinart DCC-1150BKTW Manual

The Cuisinart DCC-1150BKTW is a 12-Cup Programmable Coffeemaker with a sleek black and stainless steel design. It features a 24-hour programmability, auto shut-off, adjustable keep-warm temperature, a charcoal water filter, and a 1-4 cup setting for optimal brewing of smaller batches. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Care Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 12-Cup Glass Carafe, Charcoal Water Filter, LCD Display with Clock, Programmable Timer, Brew Pause & Serve, Adjustable Auto Shut-Off (0-4 hours), and 1-4 Cup Setting.

Feature	Description
24-Hour Programmability	Set brew time in advance
Auto Shut-Off	Turns off automatically after brewing (0-4 hour adjustable)
Adjustable Keep-Warm	Customizable temperature setting
1-4 Cup Setting	Optimizes brewing for smaller batches
Brew Pause & Serve	Pause brewing to pour a cup
Charcoal Water Filter	Removes impurities for better tasting coffee
LCD Display	Shows time, program status, and settings
ON/OFF Button	Powers unit on/off
PROGRAM Button	Sets brew time
HOUR / MINUTE Buttons	Adjusts time settings

Installation

Unpack and inspect contents. Place on a clean, dry, level, and heat-resistant surface.

Remove all packaging materials from inside and outside the coffeemaker.
Wash the carafe, lid, and filter basket with warm, soapy water. Rinse and dry thoroughly.
Insert the charcoal water filter into the filter holder (follow priming instructions).
Plug the power cord into a standard 120V AC electrical outlet.

WARNING! Do not place on or near a hot gas or electric burner, or in a heated oven. Ensure the power cord does not hang over the edge of the counter.

First-Time Setup

Power on the coffeemaker; the LCD will illuminate.

Set the Clock: Press and hold the HOUR and MINUTE buttons to set the current time.
Prime the Water Filter: Soak the charcoal filter in water for 15 minutes, then run a full cycle of plain water through the coffeemaker (without coffee).
Program Brew Time (Optional): Press PROGRAM, then use HOUR/MINUTE to set the desired brew time.
Adjust Settings: Use the MENU/SETTINGS button to adjust auto shut-off time and keep-warm temperature.

CAUTION! Before first use, complete a brewing cycle with water only to clean the interior. Do not use without water.

Specifications

Capacity: 12 cups (5.7 oz per cup).
Power: 120V AC, 60Hz, 900W.
Carafe: Glass, with ergonomic handle and dripless spout.
Filter: Permanent gold-tone filter included; compatible with #4 paper filters.
Water Filtration: Charcoal water filter (included).
Programmability: 24-hour advance brew start.
Auto Shut-Off: Adjustable from 0 to 4 hours.
Warranty: Limited 3-year warranty.

Controls and Settings

Access functions via the front control panel. Buttons: ON/OFF, PROGRAM, HOUR, MINUTE, MENU/SETTINGS.

LCD Display: Shows time, "Program" indicator, "Ready" light, and setting icons.

Clock Setting: Hold HOUR/MINUTE. Program Timer: Press PROGRAM, then set time with HOUR/MINUTE. Auto Shut-Off: Press MENU to cycle through shut-off durations (0, 0.5, 1, 2, 4 hours). Keep-Warm Temp: Press MENU while in settings mode to toggle between high and low warming plate temperature. 1-4 Cup Setting: Automatically activated when brewing 1-4 cups for optimal flavor extraction.

Brewing Coffee

For best results, use fresh, cold water and medium grind coffee.

Fill the water reservoir with desired amount of cold water.
Place a #4 paper filter or the permanent filter into the filter basket.
Add coffee grounds (1 tablespoon per cup, adjust to taste).
Place the empty carafe on the warming plate.
Press ON/OFF to start brewing immediately. For programmed brew, ensure "Program" light is on at the set time.
Use Brew Pause & Serve to pour a cup during the brew cycle.
After brewing, auto shut-off will engage after the selected time (0-4 hrs).

Tip: For 1-4 cups, the machine automatically adjusts brew time and temperature. Replace the charcoal water filter every 60 cycles or every 2 months.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Wash carafe, lid, and filter basket in warm, soapy water. Do not immerse the base unit in water.
Decalcification: Run a brewing cycle with a mixture of half white vinegar and half water monthly (or as needed based on water hardness). Follow with 2-3 cycles of plain water to rinse.
Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners.
Charcoal Filter: Replace every 60 brew cycles or 2 months.

WARNING! Always unplug the unit and allow it to cool completely before cleaning. Never immerse the base, cord, or plug in water.

Care Instructions

Handle the glass carafe with care. Avoid sudden temperature changes.

CAUTION! Do not use cracked or chipped carafe. Do not use abrasive scouring pads or harsh cleaners. The warming plate surface is hot during and after use.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact customer service at 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	No power	Ensure unit is plugged in; check outlet; press ON/OFF firmly.
Coffee tastes bad	Old coffee/water/filter	Use fresh coffee and cold water; clean unit; replace charcoal filter.
Water doesn't brew	Clogged filter/water lines	Check for blockage in filter basket; descale the unit.
Program doesn't work	Incorrect time set	Ensure clock is set correctly and "Program" light is on.
Leaking water	Misaligned carafe/filter	Ensure carafe is positioned correctly; check that filter basket is seated properly.

Reset: Unplug unit for 1 minute, then plug back in to reset electronic controls.

Service: 1-800-726-0190; www.cuisinart.com