Cuisinart DCC-1200C Brew Central Programmable Coffeemaker Manual

The Cuisinart DCC-1200C Brew Central is a 12-cup programmable coffeemaker featuring a 24-hour advance brew start, auto shut-off (0-4 hours), brew pause & serve, self-cleaning function, charcoal water filter, and a stainless steel thermal carafe to keep coffee hot. It includes a permanent gold-tone filter, measuring scoop, and a 3-year limited warranty. Below are key sections for safety, features, setup, operation, cleaning, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming & Operation 7. Cleaning & Maintenance 8. Safety Features 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel thermal carafe, Control Panel with LCD display, Charcoal water filter, Permanent gold-tone filter, Measuring scoop.

FeatureDescription
12-Cup CapacityBrews up to 12 cups (5 oz per cup) into thermal carafe
Programmable Timer24-hour advance programming for automatic brew start
Auto Shut-OffAutomatically turns off 0 to 4 hours after brewing (user selectable)
Brew Pause & ServePause brewing to pour a cup before cycle completes
Self-CleaningOne-touch cleaning cycle to remove mineral deposits
Charcoal Water FilterImproves taste by reducing chlorine and impurities
Stainless Steel CarafeVacuum-insulated to keep coffee hot without warming plate
Permanent FilterGold-tone filter eliminates need for paper filters
LCD DisplayShows time, programming status, and alerts
Power On/Off ButtonMain power control for the unit

Installation & Setup

Unpack and inspect all components. Place on clean, dry, level surface away from edges.

  1. Insert charcoal water filter: Soak filter in water for 15 minutes, then place in filter holder in water reservoir.
  2. Install permanent filter: Place gold-tone filter into the filter basket.
  3. Prepare carafe: Ensure carafe is clean and lid is properly attached.
  4. Plug into 120V AC outlet.

WARNING! Keep cord away from heated surfaces. Do not immerse base, cord, or plug in water.

First-Time Use

Before first brew, perform a cleaning cycle to remove any manufacturing residues.

  1. Fill water reservoir to MAX line with clean water.
  2. Press and hold the CLEAN button for 3 seconds until indicator lights.
  3. Allow cycle to complete (approximately 30 minutes). Discard water.
  4. Repeat with fresh water if desired.
  5. Your coffeemaker is now ready for brewing.

CAUTION! Use only cold water. Do not use without water in reservoir.

Specifications

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MIN, AUTO ON, AUTO OFF, CLEAN, 1-4 CUP, BREW.

LCD Display: Shows current time, programmed brew time, auto-off status, and clean indicator.

Clock Setting: Press and hold HOUR and MIN to set time. Programming: Use PROGRAM, HOUR, MIN to set auto-brew time. Auto Shut-Off: Press AUTO OFF to cycle through 0, 1, 2, 3, 4-hour settings. 1-4 Cup Setting: Adjusts brew strength for smaller quantities. Clean: Initiates self-cleaning cycle.

Programming & Operation

For manual brew or programmed automatic brewing.

  1. Fill reservoir with cold water to desired cup level.
  2. Add medium-grind coffee to filter (1 scoop per cup).
  3. Place carafe on warming base and close lid.
  4. For immediate brew: Press BREW.
  5. For programmed brew: Set clock, then press PROGRAM and use HOUR/MIN to set brew time. Press AUTO ON to activate.
  6. Use BREW PAUSE to pour a cup during brewing cycle.
  7. Auto shut-off will activate per your setting (0-4 hrs).

Tip: For best taste, use filtered water and clean machine monthly.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

  1. Daily: Wash carafe, lid, and filter basket in warm, soapy water. Rinse thoroughly.
  2. Monthly self-clean: Fill reservoir with clean water, press and hold CLEAN for 3 seconds.
  3. Descaling: For hard water areas, run self-clean cycle with equal parts water and white vinegar, then run twice with clean water.
  4. Filter replacement: Replace charcoal water filter every 60 cycles or 2 months.

WARNING! Unplug and allow to cool before cleaning. Do not use abrasive cleaners.

Safety Features

Auto Shut-Off: Prevents overheating if left on. Brew Pause & Serve: Allows safe pouring during brew cycle. Thermal Carafe: Eliminates hot warming plate. Safety Lock Lid: Prevents accidental opening.

Warranty Information

Cuisinart offers a 3-year limited warranty on the DCC-1200C. This warranty covers defects in materials and workmanship under normal home use. Proof of purchase required. For warranty service, contact Cuisinart Customer Service at 1-800-726-0190 or visit www.cuisinart.com. Not covered: damage from misuse, commercial use, or unauthorized repair.

Troubleshooting

SymptomPossible CauseCorrective Action
No power / display offNot plugged in / outlet issueEnsure plug is secure; try different outlet; check circuit breaker.
Coffee doesn't brewWater reservoir empty / programming errorFill reservoir with water; ensure BREW button pressed or auto-on programmed correctly.
Coffee tastes badOld filter / mineral buildupReplace charcoal water filter; run cleaning cycle; use fresh coffee.
Leaking waterMisaligned carafe / overfilled reservoirEnsure carafe is properly seated; do not fill past MAX line.
Auto program not workingIncorrect time set / AM/PM errorReset clock ensuring correct AM/PM; reprogram auto-on time.
Clean light flashingMineral buildup detectedRun self-cleaning cycle; descale if necessary.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-726-0190; www.cuisinart.com

Cuisinart DCC-1200C Brew Central Programmable Coffeemaker Manual © - All Rights Reserved 2025