Cuisinart DCC-3650C Manual

The Cuisinart DCC-3650C is a 14-Cup Programmable Coffeemaker with a 24-hour advance brew start, 1-4 cup setting, auto shut-off, and a charcoal water filter. It features a stainless steel finish, a brew pause function, and a digital clock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cleaning & Maintenance 7. Programming & Operation 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: 14-Cup Glass Carafe, Charcoal Water Filter, Brew Basket, Digital Control Panel, Power Base.

Feature	Description
14-Cup Capacity	Brews up to 14 cups (4 oz per cup) of coffee
Programmable	24-hour advance brew start timer
1-4 Cup Setting	Optimizes brewing for smaller amounts
Auto Shut-Off	Automatically turns off after brewing (0-4 hours adjustable)
Brew Pause	Allows you to pour a cup before brewing is complete
Charcoal Water Filter	Removes chlorine and impurities for better taste
Digital Clock	Displays time and programming status
Stainless Steel Finish	Durable and easy to clean exterior
Audible Signal	Beeps when brewing is complete
Power On Indicator	LED light indicates when unit is on

Installation

Unpack and inspect all contents. Place on a clean, dry, level surface away from edges.

Remove all packaging materials from inside and outside the coffeemaker.
Wash the carafe, brew basket, and charcoal water filter holder with warm, soapy water. Rinse and dry thoroughly.
Insert the charcoal water filter into the filter holder and place it in the water reservoir.
Fill the water reservoir completely and run a brewing cycle with just water (no coffee) to clean the internal system. Discard this water.
Plug the power cord into a standard 120V AC electrical outlet.

WARNING! Do not immerse the base, cord, or plug in water or other liquids. Ensure the carafe is properly positioned before brewing.

First-Time Setup

After cleaning cycle, the coffeemaker is ready for programming.

Set the Clock: Press and hold the HOUR and MIN buttons to set the current time.
Program Brew Time: Press the PROG button, then use HOUR and MIN to set the desired brew time. Press PROG again to confirm.
Set Auto Shut-Off: Press the AUTO OFF button to cycle through shut-off delay options (0, 2, or 4 hours).
For immediate brewing: Add coffee to the filter, fill the reservoir with water, and press the ON/AUTO OFF button.

CAUTION! Use only cold, fresh water. Do not use distilled or mineral water. Ensure the carafe lid is securely closed.

Specifications

Model: DCC-3650C
Capacity: 14 cups (4 oz per cup)
Power: 120V AC, 60Hz, 900W
Cord Length: 30 inches
Dimensions (HxWxD): 13.5" x 8" x 9.5"
Weight: 6.5 lbs
Filter Type: Standard #4 paper filter or permanent filter (not included)
Water Filter: Charcoal water filter (included)
Warranty: 3-year limited warranty
Material: Stainless steel housing, glass carafe, plastic parts

Controls and Settings

Control Panel: ON/AUTO OFF, PROG, HOUR, MIN, 1-4 CUP, CLOCK, RESET.

Functions: ON/AUTO OFF - Starts brewing or sets auto shut-off delay. PROG - Programs brew start time. HOUR/MIN - Adjusts time settings. 1-4 CUP - Selects small batch setting. CLOCK - Enters clock set mode. RESET - Resets the control panel in case of malfunction.

Settings: Clock (12/24 hour format), Brew Start Time (programmable), Auto Shut-Off (0, 2, 4 hours), 1-4 Cup Setting (on/off).

Cleaning & Maintenance

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Empty and rinse the carafe and brew basket after each use.
Weekly: Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners.
Monthly: Descale the coffeemaker using a commercial descaling solution or white vinegar solution (run a cycle with equal parts water and vinegar, then run 2-3 cycles with clean water).
Filter Replacement: Replace the charcoal water filter every 60 brew cycles or every 2 months.

CAUTION! Unplug the coffeemaker before cleaning. Never immerse the base in water. The carafe is dishwasher safe (top rack only).

Programming & Operation

Supports scheduled brewing and manual operation.

Manual Brew: Add coffee to filter, fill reservoir, press ON/AUTO OFF.
Programmed Brew: Set the clock. Press PROG, set brew time with HOUR/MIN. Add coffee and water the night before. The coffeemaker will start automatically at the set time.
Brew Pause: During brewing, you can briefly remove the carafe to pour a cup. Replace within 20 seconds to continue brewing.
1-4 Cup Setting: Press the 1-4 CUP button before brewing for optimal flavor with small amounts.
Auto Shut-Off: Press AUTO OFF to select delay (0, 2, 4 hours) after brewing completes.

WARNING! Do not place the carafe on a heated surface or flame. The carafe is designed for use only with this coffeemaker.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	No power	Check if plugged in; check outlet; press RESET button.
Water doesn't brew	Mineral buildup/clog	Descale the unit; ensure water reservoir is filled.
Coffee tastes bad	Old filter/coffee	Replace charcoal water filter; use fresh coffee; clean carafe.
Programmed brew doesn't start	Clock not set/program error	Set correct time; reprogram brew time; ensure ON/AUTO OFF light is on.
Leaking water	Misaligned parts	Ensure brew basket and carafe are properly positioned; check for cracks.
No hot coffee	Heating element	Allow to warm up for 5 minutes; if still cold, contact service.

Reset: Unplug for 10 minutes, then plug back in. Press RESET if available.

Warranty & Support

Cuisinart provides a 3-year limited warranty for the DCC-3650C. This warranty covers defects in materials and workmanship under normal household use. Proof of purchase is required. For service, contact Cuisinart Customer Service.

Support: 1-800-726-0190; www.cuisinart.com