Cuisinart DGB-2 Series Manual

The Cuisinart DGB-2 Series is a programmable coffeemaker with a built-in grinder, featuring a 24-hour programmability, 1 to 4 cup setting, auto shut-off, charcoal water filter, gold-tone filter, and a stainless steel finish. It grinds whole beans directly into the filter for maximum freshness. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Bean hopper with lid, Grinder, Filter basket, Carafe, Control panel with LCD display, Water reservoir.

Feature	Description
Built-in Burr Grinder	Grinds whole beans directly into filter for fresh coffee
Programmable 24-Hour Clock	Set brew time in advance
1 to 4 Cup Setting	Optimizes brewing for smaller quantities
Auto Shut-Off	Turns off automatically after brewing is complete
Charcoal Water Filter	Removes impurities for better tasting coffee
Gold-Tone Permanent Filter	Eliminates need for paper filters
Stainless Steel Carafe	Keeps coffee hot; thermal design
LCD Display	Shows time, programming status, and alerts
Grind Selector	Adjustable from fine to coarse grind
Brew Pause	Allows pouring a cup before brewing finishes

Installation

Unpack and inspect contents. Place on a clean, dry, level surface near an electrical outlet.

Remove all packaging materials and stickers.
Wash carafe, filter basket, and permanent filter with warm, soapy water. Rinse and dry.
Insert the charcoal water filter into the holder in the water reservoir (soak filter first for 5 minutes).
Fill water reservoir with cold water to the desired level.
Plug power cord into a 120V AC outlet.

WARNING! Do not immerse coffeemaker, cord, or plug in water. Handle carafe with care to avoid breakage.

First-Time Setup

Power on coffeemaker; set clock and preferences.

Set the clock: Press and hold HOUR and MINUTE buttons to set current time.
Prime the water filter: Run a cycle of plain water (without coffee) through the machine.
Adjust grind setting: Turn grind selector to desired coarseness (medium recommended).
Load beans: Fill bean hopper with whole coffee beans (do not exceed MAX line).
Test brew: Brew a pot following standard brewing instructions.

CAUTION! Ensure machine is on a stable, heat-resistant surface away from edges.

Specifications

Capacity: Up to 12 cups (60 oz).
Grinder Type: Burr grinder with adjustable settings.
Filter: Permanent gold-tone filter; includes charcoal water filter.
Programmability: 24-hour advance brew start.
Special Features: 1-4 cup setting, auto shut-off, brew pause, LCD display.
Carafe: Stainless steel, thermal.
Power: 120V AC, 60Hz, 900W.
Dimensions: Approximately 14" H x 8" W x 10" D.
Weight: Approximately 8 lbs.

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MINUTE, GRIND OFF/BOLD, 1-4 CUP, BREW.

Display Indicators: Clock, PROGRAM, GRIND, BOLD, AUTO OFF.

Settings: Clock set, Program start time, Grind selector (fine to coarse), Brew strength (BOLD), 1-4 cup setting, Grind Off option (for pre-ground coffee).

Brewing Coffee

For fresh ground coffee or pre-ground coffee.

Ensure water reservoir is filled to desired level.
For whole beans: Fill bean hopper, set grind selector.
For pre-ground: Place coffee in filter basket, press GRIND OFF.
Place empty carafe on warming plate.
Press BREW to start immediate brewing, or set PROGRAM for delayed brew.
Brewing begins; grinder operates first (if enabled), then water heats and brews.
Use BREW PAUSE to pour a cup during brewing.
When complete, auto shut-off engages. Remove carafe.

Tip: Use 1 tablespoon of ground coffee per cup (6 oz) as a starting point.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Wash carafe, lid, and filter basket in warm, soapy water. Rinse thoroughly.
Monthly: Descale machine by running a cycle with equal parts white vinegar and water, then run several cycles with clean water to rinse.
Charcoal filter: Replace every 60 days or after 60 uses, or as indicated.
Exterior: Wipe with a damp cloth; do not use abrasive cleaners.
Grinder cleaning: Unplug, remove bean hopper, wipe with dry cloth. Do not wash burrs.

CAUTION! Always unplug before cleaning. Never immerse unit in water.

Programming

Set the machine to brew automatically at a later time.

Set the current time using HOUR and MINUTE.
Press PROGRAM; display shows "PROGRAM" and time.
Use HOUR and MINUTE to set desired brew start time.
Press PROGRAM again to confirm.
Ensure water and coffee beans are loaded, and machine is ON.
At set time, machine will grind (if enabled) and brew automatically.
To cancel program, press and hold PROGRAM until indicator disappears.

Note: Power interruption may require resetting the clock and program.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	No power	Check plug; ensure outlet works; press POWER.
Coffee not brewing	Water empty/program not set	Fill reservoir; ensure BREW pressed or program active.
Grinder not working	Beans empty/GRIND OFF on	Add beans; ensure GRIND OFF is not selected.
Weak coffee	Incorrect grind/measurement	Use finer grind; add more coffee per cup.
Leaking water	Misaligned components	Ensure carafe, filter basket are properly placed.
Clock resets	Power interruption	Reset clock after power is restored.
Charcoal filter light on	Filter needs replacement	Replace charcoal water filter.

Reset: Unplug for 10 seconds, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com