Cuisinart DGB-2C Series Manual

The Cuisinart DGB-2C Series is a fully automatic thermal carafe coffee maker with programmable features, a 24-hour digital clock, and a 1-4 cup setting for optimal flavor. It includes a charcoal water filter, a permanent gold-tone filter, and an auto shut-off function for safety. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Care Instructions 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Thermal carafe, Charcoal water filter, Permanent gold-tone filter, Digital clock with programmable timer, 1-4 cup setting, Auto shut-off.

Feature	Description
Thermal Carafe	Stainless steel, double-wall insulation to keep coffee hot
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee
Permanent Gold-Tone Filter	Reusable, eliminates need for paper filters
Digital Clock	24-hour display with programmable timer
1-4 Cup Setting	Adjusts brewing strength for smaller batches
Auto Shut-Off	Turns off automatically after brewing is complete
Programmable	Set brew time in advance
Brew Pause	Allows you to pour a cup before brewing finishes
Water Window	Shows water level for easy filling
On/Off Switch	Manual control for power

Installation

Unpack and inspect contents. Place on a clean, dry, level surface.

Remove all packaging materials from the carafe, filter, and unit.
Wash the carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
Insert the charcoal water filter into the filter holder as per instructions.
Fill the water reservoir with cold water to the desired level.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not immerse the coffee maker, cord, or plug in water or other liquids. Ensure the carafe is properly seated before brewing.

First-Time Setup

Before first use, perform a cleaning cycle to remove any manufacturing residues.

Fill the water reservoir to the MAX line with cold water.
Place the empty carafe on the warming plate.
Turn the unit ON and allow it to run through a full brew cycle without coffee.
Discard the water. The unit is now ready for use.
Set the clock: Press and hold the CLOCK button, then use HOUR and MIN buttons to set the time.
To program the auto brew: Set the desired brew time using the PROGRAM button.

CAUTION! Use only cold water in the reservoir. Do not use without the filter in place.

Specifications

Capacity: Up to 12 cups (60 oz).
Carafe: Stainless steel thermal, double-wall insulated.
Filter: Permanent gold-tone filter; includes charcoal water filter.
Controls: Digital display, programmable timer, 1-4 cup setting, brew pause.
Power: 120V AC, 60Hz, 900W.
Dimensions: Standard countertop size.
Weight: Approximately 5 lbs.
Warranty: Limited 3-year warranty.

Controls and Settings

Front Panel: ON/OFF switch, PROGRAM, CLOCK, HOUR, MIN, 1-4 CUP setting.

Display: Shows time, programmed brew time, and brew status.

Clock Setting: Press and hold CLOCK, adjust with HOUR/MIN. Program Timer: Press PROGRAM, set time with HOUR/MIN. 1-4 Cup Setting: Press button to select for optimal flavor with smaller batches. Auto Shut-Off: Automatically turns off after brewing. Brew Pause: Allows pouring a cup during brewing (press carafe against switch).

Brewing Coffee

For best results, use fresh, cold water and medium grind coffee.

Ensure the charcoal water filter is installed and the permanent filter is in place.
Fill the water reservoir to the desired level using the water window as a guide.
Add coffee grounds to the filter. Use one tablespoon per cup, or adjust to taste.
Place the empty carafe on the warming plate.
Press ON/OFF to start brewing. The display will show the brewing progress.
To pause brewing, simply remove the carafe. Replace to continue.
When brewing is complete, the unit will shut off automatically.

Tip: For optimal flavor, use the 1-4 cup setting when brewing fewer than 5 cups.

Cleaning & Maintenance

Regular cleaning ensures best performance and longevity.

Daily: Wash carafe, lid, and permanent filter with warm, soapy water. Rinse thoroughly.
Monthly: Descale the unit to remove mineral deposits. Use a vinegar solution or commercial descaler.
Charcoal Filter: Replace every 60 days or after 60 uses for optimal water filtration.
Exterior: Wipe with a damp cloth. Do not use abrasive cleaners.

Descaling Procedure: Fill reservoir with equal parts white vinegar and water. Run a brew cycle without coffee. Discard solution. Run two cycles with clean water to rinse.

Care Instructions

Unplug before cleaning. Do not immerse in water. Use only recommended cleaning agents.

CAUTION! Do not use the carafe on a stovetop or in a microwave. Avoid using harsh chemicals or abrasive pads.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee maker won't turn on	Power source/switch	Ensure unit is plugged in; check outlet; press ON/OFF firmly.
Coffee tastes bad	Old coffee/water filter	Use fresh coffee and cold water; replace charcoal filter.
Water doesn't flow	Clogged filter/descaling needed	Clean permanent filter; descale the unit.
Clock resets	Power interruption	Reset the time after a power outage.
Leaking water	Carafe not seated/filter misaligned	Ensure carafe is properly placed; check filter alignment.
Auto brew not working	Program not set correctly	Re-program the brew time; ensure clock is set accurately.

Reset: Unplug for 10 seconds, then plug back in to reset the electronic controls.

Service: 1-800-726-0190; www.cuisinart.com