Cuisinart DGB-600BCFR Grind And Brew Coffee Maker Manual

The Cuisinart DGB-600BCFR Grind and Brew Thermal 12-Cup Coffeemaker is a fully automatic machine that grinds whole beans just before brewing for maximum freshness. It features a double-wall stainless steel thermal carafe to keep coffee hot for hours, a 24-hour programmable timer, a charcoal water filter, an adjustable grind selector, a brew strength control, and an auto shut-off function. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming & Operation 7. Cleaning & Maintenance 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Grinder hopper with bean selector, Thermal stainless steel carafe, Charcoal water filter, Control panel with LCD display, Removable water reservoir, Permanent gold-tone filter.

Feature	Description
Grind & Brew Technology	Grinds whole beans immediately before brewing for freshest flavor
Thermal Carafe	Double-wall stainless steel, 12-cup capacity, keeps coffee hot for hours
24-Hour Programmable Timer	Set the coffeemaker to brew automatically at a selected time
Adjustable Grind Selector	Choose from fine to coarse grind settings
Brew Strength Control	Select regular or bold flavor strength
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee (included)
Auto Shut-Off	Turns off heating plate and grinder after brewing is complete
LCD Display	Shows time, programming status, and alerts
Permanent Filter	Gold-tone filter eliminates need for paper filters
Grind Off / Brew Only	Option to use pre-ground coffee instead of whole beans

Installation & Setup

Unpack and inspect all components. Place on a clean, dry, level, and stable surface near an electrical outlet.

Remove all packaging materials and tape from the unit and carafe.
Wash the carafe lid, filter basket, and permanent filter with warm, soapy water. Rinse and dry.
Insert the charcoal water filter into the holder in the water reservoir (soak filter first for 5 minutes).
Fill the water reservoir to the MAX line with fresh, cold water and run a brewing cycle without coffee to clean the system.

WARNING! Ensure the unit is unplugged during initial cleaning. Handle the glass carafe with care to avoid breakage.

First-Time Use

After the initial cleaning cycle, the coffeemaker is ready for programming and brewing.

Set the clock: Press and hold the HOUR and MIN buttons until the correct time is displayed.
Add whole beans to the grinder hopper or pre-ground coffee to the filter basket (select GRIND OFF).
Select desired grind setting (1-4, fine to coarse) and brew strength (REGULAR or BOLD).
Press the BREW button to start the manual brewing cycle.
To program auto-brew: Set the clock, then use the PROGRAM button to set the desired brew time.

CAUTION! Do not add water to the grinder hopper. Only use the water reservoir for liquids.

Specifications

Model: DGB-600BCFR
Capacity: 12 cups (5 fl oz per cup)
Carafe: Double-wall stainless steel thermal, 60 oz
Power: 120V AC, 60Hz, 1000W
Grind Settings: 4 settings (Fine to Coarse)
Brew Strength: Regular or Bold
Programmability: 24-hour digital clock with auto-brew
Filter: Permanent gold-tone filter (included); Charcoal water filter (included)
Dimensions: Approx. 11.5" W x 15.5" H x 8.5" D
Weight: Approx. 10 lbs

Controls and Settings

Control Panel: POWER button, BREW button, PROGRAM button, HOUR/MIN buttons, GRIND SELECTOR (1-4), BREW STRENGTH (Regular/Bold), GRIND OFF button, LCD display.

Functions: Clock setting, Programmed auto-brew, Manual brew, Grind selector, Brew strength, Grind override for pre-ground coffee.

LCD Indicators: Clock time, Programmed brew time, "Add Water" alert, "Clean" indicator, "Ready" light.

Programming & Operation

For automatic brewing at a set time each day.

Ensure the clock is set to the correct time.
Fill the water reservoir and add whole beans to the hopper.
Press and hold PROGRAM. While holding, press HOUR and MIN to set the desired brew time.
Release PROGRAM. The programmed time will flash, then the display returns to the current time. The auto-brew light will illuminate.
The coffeemaker will grind and brew automatically at the set time. To cancel, press and hold PROGRAM for 3 seconds.

Tip: For best results, use fresh, cold water and whole coffee beans. Adjust grind and strength to taste.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Empty and rinse the carafe and filter basket. Wipe the warming plate with a damp cloth.
Weekly: Clean the grinder by running a small amount of uncooked rice through it (1/4 cup). Wipe the bean hopper with a dry cloth.
Monthly: Descale the unit using a vinegar solution (1 part vinegar to 2 parts water) or commercial descaling agent. Run a brewing cycle, then run 2-3 cycles with clean water to rinse.
Charcoal Filter: Replace every 60 days or after 60 uses for optimal water filtration.

WARNING! Always unplug the unit before cleaning. Never immerse the base, cord, or plug in water.

Safety Features

Auto Shut-Off: Turns off the heating element and grinder 2 hours after brewing is complete. Overheat Protection: Built-in thermal fuse prevents overheating. Carafe Safety: Brewing will not start unless the carafe is properly placed on the warming plate.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact customer service at 1-800-726-0190. Model DGB-600BCFR is a registered trademark of Conair Corporation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	No power	Check that unit is plugged in; ensure outlet is working; press POWER button.
No grinding occurs	Grind Off selected / Hopper empty	Ensure GRIND OFF light is not lit; add whole beans to hopper.
Coffee tastes weak or bitter	Incorrect grind/strength setting	Adjust grind to a finer setting for stronger flavor; select BOLD brew strength.
Auto-brew doesn't start	Clock not set / Program not activated	Set the correct time; ensure PROGRAM light is on; check water and beans.
Water doesn't flow through	Clogged filter / Mineral buildup	Clean permanent filter; descale the unit; ensure charcoal filter is installed.
"Add Water" light is on	Low water level	Fill water reservoir to desired level, between MIN and MAX lines.
Carafe leaks	Lid not secured / Carafe damaged	Ensure lid is tightly closed; inspect carafe for cracks; replace if necessary.

Reset: Unplug the unit for 2 minutes, then plug back in to reset the control panel.

Service: 1-800-726-0190; www.cuisinart.com