Cuisinart DGB-625C Series Grind & Brew Manual

The Cuisinart DGB-625C Series Grind & Brew is a fully automatic coffee maker featuring a built-in burr grinder, programmable settings, a 12-cup thermal carafe, and a charcoal water filter. It offers multiple grind settings, brew strength control, a 24-hour programmable timer, and an auto-shutoff function. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Grinder 7. Brewing Coffee 8. Cleaning & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Burr grinder with adjustable settings, 12-cup double-wall thermal carafe, Charcoal water filter, Programmable LCD display, Grind Off/Brew Pause feature.

FeatureDescription
Built-in Burr GrinderGrinds beans fresh before brewing; adjustable coarseness
12-Cup Thermal CarafeDouble-wall stainless steel to keep coffee hot for hours
Programmable TimerSet brew time up to 24 hours in advance
Brew Strength ControlSelect Regular or Bold flavor strength
Charcoal Water FilterRemoves impurities for better tasting coffee
Auto Shut-OffTurns off automatically after brewing is complete
Grind Off OptionBrew with pre-ground coffee instead of whole beans
Brew PausePause brewing to pour a cup before cycle finishes
LCD DisplayShows time, program settings, and status messages
Audible AlertBeeps when brewing is complete

Installation

Unpack and inspect contents. Place on a clean, dry, level surface near a power outlet.

  1. Remove all packaging materials and stickers from the unit and carafe.
  2. Wash the carafe, lid, and permanent filter with warm, soapy water. Rinse and dry thoroughly.
  3. Insert the charcoal water filter into the filter holder in the water reservoir (soak filter for 15 minutes first).
  4. Fill the water reservoir with cold water to the desired cup level.
  5. Plug the power cord into a 120V AC outlet.

WARNING! Do not immerse the base, cord, or plug in water or other liquids. Ensure the unit is on a stable surface away from heat sources.

First-Time Setup

Power on the unit; the LCD will illuminate. Set the clock before programming.

  1. Set the clock: Press and hold the CLOCK button, then use HOUR and MIN buttons to set the correct time.
  2. Program the auto brew: Press the PROGRAM button, then set the desired brew time using HOUR and MIN.
  3. Select brew strength: Press the STRENGTH button to toggle between Regular and Bold.
  4. Select grind setting: Turn the grind selector knob to desired coarseness (1-18).
  5. Run a water-only cycle: Without coffee, start a brew cycle to clean the system before first use.

CAUTION! Ensure the carafe is properly seated on the warming plate before starting any cycle.

Specifications

Controls and Settings

Front Panel: POWER, CLOCK, PROGRAM, HOUR, MIN, STRENGTH, GRIND OFF, BREW PAUSE. Grind Selector Knob on side (1-18).

LCD Icons: Clock, Program Set, Brew Strength, Grind Off, Auto Brew.

Clock Setting: Hold CLOCK, adjust with HOUR/MIN. Program Timer: Press PROGRAM, set brew time with HOUR/MIN. Brew Strength: Press STRENGTH to toggle. Grind Setting: Turn knob (1= finest, 18= coarsest). Grind Off: Press to use pre-ground coffee. Brew Pause: Press to interrupt brewing and pour a cup.

Using the Grinder

The burr grinder ensures consistent grind size for optimal extraction.

  1. Ensure the bean hopper lid is securely closed.
  2. Turn the grind selector knob to desired setting (1-18).
  3. For pre-ground coffee, press the GRIND OFF button (light will illuminate).
  4. Add whole beans to the hopper (max capacity: ½ lb).
  5. The grinder will automatically operate during the brew cycle.

Tip: For finer grind (espresso-style), use lower numbers. For coarser grind (French press), use higher numbers. Clean the grinder chamber regularly to prevent oil buildup.

Brewing Coffee

Supports both whole bean and pre-ground coffee.

  1. Fill the water reservoir with cold, filtered water to desired cup level.
  2. Add whole beans to hopper or place pre-ground coffee in the filter basket (press GRIND OFF first).
    3. 3. Place the empty carafe on the warming plate.
  3. Select brew strength with STRENGTH button (optional).
  4. Press the POWER button to start brewing immediately.
  5. For programmed brew: Set program time, and the unit will start automatically.
  6. Use BREW PAUSE to pour a cup before cycle finishes (pause for up to 30 seconds).
  7. When brewing is complete, the unit will beep and auto-shut off after 2 hours.

WARNING! Do not remove the carafe during grinding or brewing unless using BREW PAUSE. The carafe lid must be securely closed during brewing.

Cleaning & Maintenance

Unplug before cleaning. Clean carafe, lid, and filter basket after each use.

  1. Daily: Wash carafe, lid, and permanent filter with warm, soapy water. Do not use abrasive cleaners.
  2. Monthly: Descale the unit with a vinegar solution (1 part vinegar to 2 parts water) to remove mineral deposits.
  3. Grinder Cleaning: Unplug, remove bean hopper, and brush out any residual grounds with the provided cleaning brush.
  4. Charcoal Filter: Replace every 60 cycles or every 2 months for optimal performance.
  5. Exterior: Wipe with a damp cloth; do not use harsh chemicals.

CAUTION! Never immerse the base, cord, or plug in water. Do not use the unit without the charcoal filter or permanent filter in place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. This appliance is for household use only. Any servicing should be performed by an authorized service representative.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit won't turn onPower cord not plugged inEnsure cord is securely plugged into outlet.
Coffee tastes weakIncorrect grind setting/strengthAdjust grind to a finer setting; select Bold strength.
Grinder not workingHopper lid open/GRIND OFF onClose hopper lid securely; ensure GRIND OFF light is off.
Water not flowingClogged filter/mineral buildupClean permanent filter; descale the unit.
Program not workingClock not set correctlyReset clock; ensure program time is set for future time.
Carafe leaksLid not secured/cracked carafeEnsure lid is locked in place; inspect for cracks.
LCD blankPower interruptionUnplug for 1 minute, then plug back in to reset.

Reset: Unplug unit for 1 minute to reset the control panel.

Service: 1-800-726-0190; www.cuisinart.com

Cuisinart DGB-625C Series Grind & Brew Manual © - All Rights Reserved 2025