Cuisinart DGB-800 Series Manual

The Cuisinart DGB-800 Series is a fully automatic grind and brew coffee maker designed for convenience and quality. It features a built-in burr grinder with adjustable grind settings, a programmable timer, a charcoal water filter, a permanent gold-tone filter, and an auto-shutoff function. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Specifications 4. Controls and Functions 5. Programming the Timer 6. Brewing Coffee 7. Care & Cleaning 8. Safety Information 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Grinder Hopper with Bean Selector, Water Reservoir, Charcoal Water Filter, Gold-Tone Permanent Filter, Carafe, Control Panel, and Power Base.

Feature	Description
Built-in Burr Grinder	Adjustable grind settings from fine to coarse
Programmable Timer	Set to grind and brew automatically up to 24 hours in advance
Charcoal Water Filter	Removes impurities for better tasting coffee
Gold-Tone Permanent Filter	Eliminates the need for paper filters
Auto Shut-Off	Turns off automatically after brewing is complete (0-4 hours selectable)
Bean Selector	Choose between whole beans or pre-ground coffee
Brew Strength Selector	Adjust for regular or bold coffee strength
LCD Display	Shows time, programming status, and alerts
12-Cup Capacity	Glass carafe with ergonomic handle and dripless spout
Cord Storage	Built-in compartment for excess power cord

Installation & Setup

Unpack and inspect all components. Place on a clean, dry, level, and heat-resistant surface.

Initial Cleaning: Wash the carafe, lid, permanent filter, and filter basket with warm, soapy water. Rinse thoroughly.
Install Water Filter: Soak the charcoal water filter in cold water for 15 minutes. Rinse and insert into the water reservoir.
Fill Reservoir: Add fresh, cold water to the desired cup level.
Add Coffee: Place the permanent filter in the basket. Add whole beans to the hopper or pre-ground coffee to the filter.
Power On: Plug into a standard 120V AC outlet. The LCD will illuminate.

WARNING! Do not immerse the power base, cord, or plug in water or other liquids. Ensure the unit is unplugged during cleaning of removable parts.

Specifications

Model: DGB-800 Series
Type: Fully Automatic Grind & Brew Coffee Maker
Capacity: Up to 12 cups (5 oz per cup)
Grinder: Built-in conical burr grinder with adjustable settings
Filter: Permanent gold-tone filter; compatible with #4 paper filters
Water Filtration: Replaceable charcoal water filter
Programmability: 24-hour digital clock with programmable auto-brew
Auto Shut-Off: Programmable from 0 to 4 hours
Power: 120V AC, 60Hz, 1000W
Dimensions (approx.): 14" H x 9" W x 7.5" D

Controls and Functions

The control panel features an LCD display and membrane buttons for all operations.

Buttons:
ON/OFF: Powers the unit on for manual brewing or off.
PROGRAM: Used to set the clock and auto-brew time.
HOUR / MINUTE: Adjusts the time during clock setting and programming.
AUTO ON: Activates the programmed auto-brew function.
GRIND: Selects the grind amount (Cups 2-12).
BREW STRENGTH: Toggles between REGULAR and BOLD.
BEAN SELECT: Chooses between WHOLE BEAN and GROUND coffee.
AUTO OFF: Sets the automatic shut-off delay (0, 1, 2, 3, 4 hours).

LCD Icons: Clock, Auto On, Ground, Bean, Brew Strength, and Alert indicators.

Programming the Timer

To set the coffee maker to brew automatically at a specific time:

Ensure the unit is plugged in and the clock is set to the correct time.
Press and hold PROGRAM. The "Auto On" icon will blink.
Use the HOUR and MINUTE buttons to set the desired brew time.
Press PROGRAM again to confirm. The "Auto On" icon will stay lit.
Fill the water reservoir and add coffee beans to the hopper the night before.
The unit will grind the beans and begin brewing at the set time.

To Cancel Auto-Brew: Press and hold AUTO ON until the "Auto On" icon turns off.

Brewing Coffee

For immediate brewing (not using the timer):

Ensure the carafe is in place on the warming plate.
Fill the water reservoir with cold water to the desired cup level.
Select WHOLE BEAN or GROUND using the BEAN SELECT button.
If using whole beans, set the grind amount (2-12 cups) with the GRIND button.
Select brew strength (REGULAR or BOLD).
Press the ON/OFF button to start the brew cycle.
The grinder will activate first (if using beans), followed by the brewing process.
When brewing is complete, the unit will beep and enter keep-warm mode.

Tip: For best flavor, use fresh, cold water and whole beans. Clean the grinder and basket regularly.

Care & Cleaning

Regular cleaning ensures optimal performance and coffee flavor.

Daily: Empty and rinse the carafe and permanent filter. Wipe the warming plate with a damp cloth.
Weekly: Descale the unit by running a brew cycle with a mixture of half white vinegar and half water. Follow with 2-3 cycles of clean water to rinse.
Grinder Cleaning: Unplug the unit. Use the provided brush to clean the burr grinder of coffee oils and residue. Do not use water or liquids on the grinder.
Water Filter: Replace the charcoal water filter every 60 days or after 60 brew cycles, or as needed for water hardness.
Exterior: Wipe with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.

CAUTION! Always unplug the unit before cleaning any part except the removable carafe and filter basket. Never immerse the main unit in water.

Safety Information

Important Safeguards:

Read all instructions before use.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock, and injury, do not immerse cord, plug, or base unit in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped/damaged.
The use of accessory attachments not recommended by Cuisinart may cause injuries.
Do not use outdoors or for commercial purposes.
Do not let cord hang over edge of table or counter, or touch hot surfaces.

Regulatory Information

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This product is for household use only. Any servicing should be performed by an authorized service representative.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Not plugged in / No power	Check power outlet and cord connection. Ensure unit is plugged in.
Coffee does not brew	Water reservoir empty / Program not set	Fill reservoir with water. For auto-brew, ensure "Auto On" is activated and time is set.
Grinder does not operate	Bean selector on "GROUND" / Hopper empty	Set selector to "WHOLE BEAN". Ensure beans are in the hopper.
Coffee tastes bitter or weak	Incorrect grind setting / Old beans / Dirty equipment	Adjust grind setting. Use fresh beans. Clean grinder, filter, and carafe.
Water does not flow through	Clogged filter / Mineral buildup	Clean or replace the permanent filter. Descale the unit.
Auto-brew does not start	Clock not set / "Auto On" not active	Set the correct time. Press AUTO ON to activate the programmed time.
LCD display is blank	Power interruption	Unplug, wait 10 seconds, and plug back in. Reset the clock.

Reset: Unplug the unit for 60 seconds to perform a full reset. Plug back in and reprogram.

Service: For repairs, contact Cuisinart Customer Service at 1-800-726-0190 or visit www.cuisinart.com.