Cuisinart DGB-800C Series Manual

The Cuisinart DGB-800C Series is a fully automatic grind and brew coffee maker featuring a built-in burr grinder, programmable settings, 12-cup thermal carafe, charcoal water filter, 24-hour advance brew start, auto shut-off, and a cleaning cycle. It offers multiple grind settings, brew strength control, and a pause-and-serve function. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming the Coffee Maker 7. Grinder Operation 8. Cleaning & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Built-in burr grinder, 12-cup double-wall thermal carafe, Charcoal water filter, Programmable clock/timer, LCD display, Control panel with buttons.

Feature	Description
Built-in Burr Grinder	Grinds beans fresh before brewing; multiple grind settings
12-Cup Thermal Carafe	Double-wall stainless steel keeps coffee hot for hours
Charcoal Water Filter	Removes impurities for better tasting coffee
Programmable Settings	Set brew time, strength, and number of cups
LCD Display	Shows time, settings, and status messages
Brew Strength Control	Select Regular or Bold flavor
24-Hour Advance Brew Start	Program coffee to brew up to a day in advance
Auto Shut-Off	Turns off automatically after brewing
Pause & Serve	Interrupt brewing to pour a cup
Cleaning Cycle	Easy clean function for internal components

Installation & Setup

Unpack and inspect contents. Place on clean, dry, level surface.

Install charcoal water filter: Rinse filter, insert into filter holder in water reservoir.
Insert carafe: Place thermal carafe on warming plate, ensuring lid is properly seated.
Fill water reservoir: Use cold water only; do not exceed 12-cup mark.
Plug into 120V AC outlet.

WARNING! Ensure hands are dry when handling electrical components. Keep cord away from heated surfaces.

First-Time Use

Before first brew, run a cleaning cycle with water only.

Set clock: Press CLOCK, then HOUR and MINUTE to set current time.
Prime the filter: Fill reservoir, place empty carafe, press CLEAN to run water through system.
Select grind setting: Turn grind selector to desired coarseness (1-18).
Load coffee beans: Fill bean hopper with fresh whole beans; close lid securely.

CAUTION! Do not use without water in reservoir. Ensure carafe is in place before brewing.

Specifications

Capacity: 12 cups (60 oz).
Grinder Type: Burr grinder with 18 settings.
Carafe: Double-wall stainless steel thermal.
Filter: Permanent gold-tone filter; charcoal water filter included.
Programmability: 24-hour advance brew start, auto shut-off.
Controls: LCD display, touchpad buttons.
Power Source: 120V AC, 60Hz, 1050W.
Dimensions: Approximately 14.5" H x 9.5" W x 11.5" D.
Weight: 11.5 lbs.

Controls and Settings

Control Panel: POWER, CLOCK, PROGRAM, AUTO ON, CUP SELECT (1-12), BREW STRENGTH (Regular/Bold), GRIND OFF, CLEAN.

LCD Display: Shows time, programmed brew time, cup count, strength setting, and status icons.

Grind Settings: Adjustable dial (1-18) for fine to coarse grind. Brew Strength: Regular (standard extraction) or Bold (stronger flavor). Cup Selection: Choose 1 to 12 cups; adjusts water and coffee amounts. Program: Set time for automatic brewing. Auto On: Activates programmed brew cycle. Grind Off: Bypasses grinder for pre-ground coffee. Clean: Initiates cleaning cycle.

Programming the Coffee Maker

To set automatic brew time:

Press PROGRAM; "PROG" appears on display.
Press HOUR and MINUTE to set desired brew time.
Press AUTO ON to activate programmed brewing.
Ensure bean hopper has beans, reservoir has water, and carafe is in place.

Tip: Program up to 24 hours in advance. To cancel, press AUTO ON again.

Grinder Operation

For whole bean grinding:

Set grind dial to desired setting (1 finest, 18 coarsest).
Fill bean hopper; do not exceed MAX line.
For pre-ground coffee: Set GRIND OFF, add grounds to filter basket.
Grind amount adjusts automatically based on cup selection.

WARNING! Never insert utensils or fingers into grinder. Unplug before cleaning grinder area.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Rinse carafe and filter basket; wipe exterior with damp cloth.
Weekly: Run cleaning cycle with vinegar solution (mix equal parts water and vinegar).
Monthly: Clean grinder with brush; replace charcoal water filter every 60 cycles or 2 months.
Descale: If in hard water area, descale every 3-6 months with citric acid solution.

CAUTION! Unplug before cleaning. Do not immerse base in water. Use only mild detergent.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190. UL listed for household use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee maker won't turn on	Power cord/outlet	Ensure plug is secure; check outlet; press POWER button.
No grinding occurs	Grind setting/hopper	Check grind dial not on "OFF"; ensure beans in hopper; lid closed.
Weak or watery coffee	Grind setting/strength	Adjust to finer grind; select BOLD strength; check cup selection.
Coffee doesn't brew at set time	Program settings	Verify time is set correctly; AUTO ON is activated; power is connected.
Leaking water	Carafe placement/filter	Ensure carafe is properly seated; filter basket is correctly installed.
Error messages on display	System error	Unplug for 2 minutes, then restart. If persists, contact support.

Reset: Unplug for 10 minutes to reset electronic controls.

Service: 1-800-726-0190; www.cuisinart.com