Cuisinart DGB650BCU Manual

The Cuisinart DGB650BCU is a 12-Cup Programmable Coffeemaker with Grinder, featuring a built-in burr grinder for fresh-ground coffee, 24-hour programmability, auto shut-off, a charcoal water filter, and a stainless steel finish. It brews 1-12 cups, includes a permanent gold-tone filter, and has settings for brew strength and grind control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming Guide 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Built-in burr grinder, 12-cup glass carafe, Charcoal water filter, Permanent gold-tone filter, Programmable timer, Brew strength selector, Grind control dial.

Feature	Description
Built-in Burr Grinder	Grinds coffee beans fresh for each brew
Programmable Timer	Set brew time up to 24 hours in advance
Brew Strength Selector	Choose regular or bold flavor
Grind Control Dial	Adjust from fine to coarse grind
Auto Shut-Off	Turns off automatically after brewing
Charcoal Water Filter	Removes impurities for better taste
Permanent Filter	Gold-tone filter, no paper needed
LCD Display	Shows time and programming status
Water Window	Indicates water level in reservoir
Pause & Serve	Interrupt brewing to pour a cup

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from inside and outside the unit.
Wash carafe, lid, and permanent filter with warm, soapy water. Rinse and dry.
Insert charcoal water filter into the filter holder in the water reservoir.
Place the unit on a stable, heat-resistant countertop away from edges.
Plug into a 120V AC outlet.

WARNING! Do not immerse base, cord, or plug in water. Keep away from children.

First-Time Setup

Before first use, run a brewing cycle with water only to clean the system.

Fill water reservoir to the 12-cup mark with fresh cold water.
Place empty carafe on the warming plate.
Press the POWER button to turn on the unit.
Press BREW to start the cleaning cycle. Discard water after cycle completes.
Set time: Press and hold CLOCK, then use HOUR and MIN buttons to set current time.

CAUTION! Do not add coffee grounds during the cleaning cycle.

Specifications

Capacity: 12 cups (60 oz).
Grinder Type: Built-in burr grinder.
Filter: Permanent gold-tone filter.
Water Filter: Charcoal filter included.
Programmability: 24-hour advance brew start.
Brew Strength: Regular or Bold setting.
Grind Settings: Adjustable dial (fine to coarse).
Power Source: 120V AC, 60Hz.
Cord Length: 30 inches.
Dimensions: 11.5" W x 8.5" D x 14.75" H.

Controls and Settings

Front Panel: POWER, BREW, PROGRAM, CLOCK, HOUR, MIN, GRIND CONTROL, BREW STRENGTH.

Display: LCD shows time, programming icons, and settings.

Grind Control: Turn dial to select grind size (1-18, fine to coarse). Brew Strength: Press button to toggle between REGULAR and BOLD. Programming: Set brew time using PROGRAM, HOUR, MIN. Clock: Adjust with CLOCK, HOUR, MIN. Auto Shut-Off: Automatically turns off 2 hours after brewing ends.

Brewing Coffee

For fresh-ground coffee using built-in grinder.

Fill water reservoir to desired cup level using water window.
Add whole coffee beans to the bean hopper (max 1/2 lb).
Set grind size using GRIND CONTROL dial.
Select brew strength (REGULAR or BOLD).
Place carafe on warming plate.
Press POWER, then BREW to start grinding and brewing.
Use PAUSE & SERVE to pour a cup during brewing.

Tip: Use 1 tablespoon of beans per cup for optimal flavor.

Cleaning & Maintenance

Unplug and cool before cleaning. Clean after each use.

Carafe and lid: Wash with warm, soapy water. Do not use abrasive cleaners.
Permanent filter: Rinse under water; use soft brush to remove grounds.
Grinder: Wipe bean hopper with dry cloth. Do not wash.
Exterior: Wipe with damp cloth. Do not immerse in water.
Descale: Run vinegar solution monthly if using hard water.

CAUTION! Never immerse base, cord, or plug in water.

Programming Guide

Set the coffeemaker to brew automatically at a specific time.

Ensure current time is set correctly using CLOCK.
Fill water reservoir and add beans to hopper.
Press PROGRAM. "PROG" icon flashes.
Use HOUR and MIN to set desired brew time.
Press PROGRAM again to confirm. "PROG" icon stays lit.
Coffeemaker will grind and brew at the set time.
To cancel program, press and hold PROGRAM until "PROG" icon turns off.

Note: Auto shut-off turns unit off 2 hours after brewing.

Safety Information

Read all instructions before use. For household use only.

Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock, do not immerse cord or plug in water.
Close supervision is necessary when used near children.
Unplug when not in use and before cleaning.
Do not operate with damaged cord or plug.
Do not use outdoors or for commercial purposes.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Not plugged in / outlet issue	Check plug; try different outlet; ensure POWER is on.
Coffee not brewing	Water reservoir empty	Fill reservoir with water; ensure carafe is properly placed.
Weak coffee	Grind too coarse / not enough beans	Adjust grind to finer setting; add more beans.
Grinder not working	Hopper empty / clogged	Add beans; clean hopper; ensure lid is closed.
Leaking water	Filter not seated / overfilled	Check filter placement; do not exceed 12-cup line.
Program not working	Time not set / program not enabled	Set current time; press PROGRAM correctly.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com