Cuisinart DGB900BCE Manual

The Cuisinart DGB900BCE is a fully automatic thermal carafe coffeemaker with a built-in burr grinder. It features a 24-hour programmable timer, auto shut-off, charcoal water filter, and a stainless steel thermal carafe that keeps coffee hot for hours. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Built-in burr grinder, 24-hour programmable timer, Thermal stainless steel carafe, Charcoal water filter, Auto shut-off, Brew pause feature.

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

1. Remove all packaging materials from carafe, filter basket, and water reservoir.
2. Wash carafe, lid, and filter basket with warm, soapy water. Rinse and dry.
3. Insert charcoal water filter into filter holder in water reservoir (soak filter first for 15 minutes).
4. Fill water reservoir with cold water to maximum line and run a brewing cycle without coffee to clean interior.

WARNING! Ensure coffeemaker is unplugged during cleaning. Handle carafe with care to avoid breakage.

First-Time Setup

Plug in coffeemaker; follow initial setup steps.

1. Set clock: Press and hold CLOCK button, use HOUR and MINUTE buttons to set time.
2. Program timer (optional): Press PROGRAM, set brew time using HOUR and MINUTE.
3. Adjust grind setting: Turn grind selector to desired coarseness (medium recommended).
4. Set cup selector: Slide to number of cups you plan to brew (adjusts coffee strength).

CAUTION! Do not use without water. Ensure carafe is properly seated on warming base.

Specifications

• Model: DGB900BCE
• Capacity: 12 cups (60 oz)
• Carafe: Stainless steel thermal
• Grinder: Built-in burr grinder with adjustable settings
• Filter: Permanent gold-tone filter; charcoal water filter included
• Timer: 24-hour programmable
• Power: 120V AC, 60Hz, 1000W
• Dimensions: 11.5" W x 15.5" H x 8.5" D
• Weight: 10.5 lbs

Controls and Settings

Front Panel: POWER, PROGRAM, CLOCK, HOUR, MINUTE, CUP SELECTOR, GRIND SELECTOR.

Display: Shows time, program status, and brew progress.

Grind Settings: Fine, Medium, Coarse (adjust for brew strength and flavor). Cup Selector: 1-12 cups (adjusts coffee-to-water ratio). Timer: Set delayed brew time up to 24 hours in advance. Clock: 12-hour format with AM/PM indicator.

Brewing Coffee

Supports whole bean or pre-ground coffee.

1. Fill water reservoir with cold water to desired cup level.
2. Add whole beans to grinder hopper (or pre-ground coffee to filter basket).
3. Place empty carafe on warming base.
4. Select cup number on cup selector.
5. Select grind setting (if using whole beans).
6. Press POWER to start brewing.
7. Use brew pause feature if you want to pour a cup early.
8. Auto shut-off turns off unit after brewing completes.

WARNING! Do not remove carafe during brewing unless using brew pause. Keep hands away from hot surfaces.

Cleaning & Maintenance

Unplug before cleaning. Clean carafe, lid, and filter basket after each use.

1. Weekly: Descale with vinegar solution (run brewing cycle with equal parts vinegar and water, then run 2 cycles with clean water).
2. Monthly: Clean grinder by running a small amount of uncooked rice through it to remove oil buildup.
3. Replace charcoal water filter every 60 brews or 2 months.
4. Wipe exterior with damp cloth; do not immerse in water.

CAUTION! Do not use abrasive cleaners. Ensure all parts are dry before reassembling.

Safety Features

Auto Shut-Off: Turns off automatically after brewing. Thermal Carafe: No hot warming plate reduces burn risk. Brew Pause: Allows safe pouring during brew cycle. Overheat Protection: Prevents damage from overheating.

Regulatory Information

UL Listed: Meets safety standards for household use. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. This appliance is for household use only.

Troubleshooting

Reset: Unplug for 10 minutes, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com