Cuisinart DGB900BCU Manual

The Cuisinart DGB900BCU is a 14-Cup Programmable Coffeemaker with Grinder, featuring a built-in burr grinder, programmable settings, auto shut-off, charcoal water filter, and a stainless steel finish. It brews up to 14 cups of coffee, allowing you to grind beans fresh for each pot. Below are key sections for safety, features, setup, operation, cleaning, and troubleshooting.

Features at a Glance

Key components: Stainless Steel Carafe, Removable Water Reservoir, Burr Grinder with Bean Hopper, Charcoal Water Filter, Control Panel with LCD Display.

Feature	Description
Built-in Burr Grinder	Grinds beans fresh before brewing; adjustable grind size
14-Cup Capacity	Brews up to 14 cups (4 oz per cup) of coffee
Fully Programmable	Set brew time, strength, and auto shut-off
Charcoal Water Filter	Removes impurities for better tasting coffee
Auto Shut-Off	Turns off automatically after brewing (0-4 hours)
Strength Control	Select Regular or Bold brew strength
LCD Display	Shows time, programming status, and alerts
Grind-Off Brew	Option to brew with pre-ground coffee
Pause & Serve	Interrupt brewing to pour a cup
Stainless Steel Carafe	Keeps coffee hot; dripless spout

Installation & Setup

Unpack and inspect all parts. Place on a clean, dry, level surface near a power outlet.

1. Remove all packaging materials and stickers.
2. Wash the carafe, lid, and water reservoir with warm, soapy water. Rinse and dry.
3. Insert the charcoal water filter into the reservoir (soak filter first for 15 minutes).
4. Fill the water reservoir to the desired level (up to 14 cups).
5. Plug the power cord into a 120V AC outlet.

WARNING! Do not immerse the coffeemaker base, cord, or plug in water. Keep away from heat sources.

First-Time Use

Before first brew, run a cleaning cycle with water only (no coffee).

1. Fill the water reservoir to the MAX line.
2. Place an empty carafe on the warming plate.
3. Press the POWER button to turn on the unit.
4. Press and hold the CLEAN button for 3 seconds to start the cleaning cycle.
5. Allow the full cycle to complete (about 30 minutes). Discard the water.
6. The coffeemaker is now ready for programming and brewing.

CAUTION! The warming plate and carafe will become hot during operation.

Specifications

• Model: DGB900BCU
• Capacity: 14 cups (4 oz per cup)
• Grinder Type: Built-in burr grinder
• Grind Settings: Adjustable from coarse to fine
• Programmable Features: Brew time, strength, auto shut-off
• Filter: Charcoal water filter (included)
• Carafe Material: Stainless steel
• Power: 120V AC, 60Hz, 1050W
• Dimensions: Approx. 14.5" H x 9.5" W x 8.5" D
• Weight: Approx. 10 lbs

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MIN, STRENGTH, GRIND OFF, AUTO OFF, CLEAN.

LCD Display: Shows clock time, programming status, brew countdown, and alerts.

Programming: Set brew time using PROGRAM, HOUR, MIN. Strength: Press STRENGTH to toggle between Regular and Bold. Grind Off: Press to bypass grinder for pre-ground coffee. Auto Off: Set shut-off delay (0, 1, 2, 3, 4 hours). Clean: Initiates cleaning cycle.

Programming the Coffeemaker

To program the coffeemaker to brew at a specific time:

1. Press POWER to turn on. The LCD will show the current time or "--:--".
2. Set the clock: Press and hold PROGRAM, then press HOUR and MIN to set the correct time. Release PROGRAM.
3. Set brew time: Press PROGRAM once. Use HOUR and MIN to set the desired brew time. Press PROGRAM again to confirm.
4. Set strength: Press STRENGTH to select Regular or Bold.
5. Set auto off: Press AUTO OFF to select shut-off delay (0-4 hours).
6. Add coffee beans to the hopper or pre-ground coffee to the filter basket.
7. Fill the water reservoir. The coffeemaker will now brew at the programmed time.

Tip: For immediate brewing, set the program time to the current time.

Grinder Operation

The built-in burr grinder ensures fresh ground coffee for each pot.

1. Lift the lid of the bean hopper (on top of the unit).
2. Add whole coffee beans. Do not exceed the MAX line.
3. Close the lid securely.
4. To adjust grind size: Turn the grind selector knob (inside the hopper) from Coarse to Fine.
5. For pre-ground coffee: Place ground coffee in the filter basket and press GRIND OFF.
6. During brewing, the grinder will automatically grind the beans before water flows.

WARNING! Never operate the grinder without beans or with the hopper lid open. Keep fingers away.

Cleaning & Maintenance

Regular cleaning ensures optimal performance and longevity.

Daily: Discard used grounds, rinse carafe and filter basket. Wipe exterior with a damp cloth.

Weekly/Monthly:

1. Run a cleaning cycle: Fill reservoir with equal parts water and white vinegar. Press and hold CLEAN. After cycle, run two cycles with clean water.
2. Clean the grinder: Unplug unit. Remove bean hopper and clean with a dry brush. Wipe burrs with a dry cloth.
3. Replace charcoal water filter every 60 days or as needed.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or immerse in water.

Safety Information

Read all instructions before use. This appliance is for household use only.

• Do not operate if cord or plug is damaged.
• Do not use outdoors or near water.
• Unplug when not in use and before cleaning.
• Do not place on or near a hot gas or electric burner.
• To reduce risk of fire, do not operate in an enclosed space.
• Scalding may occur if lid is removed during brewing.

For compliance information: FCC Part 15 Class B. This device complies with industry standards.

Warranty & Support

Cuisinart offers a limited 3-year warranty on this coffeemaker. Proof of purchase required.

For customer service, product support, or to register your product:

• Visit: www.cuisinart.com
• Call: 1-800-726-0190
• Email: [email protected]

Copyright © Cuisinart. All trademarks are property of Conair Corporation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	No power	Check power outlet; ensure cord is plugged in securely.
No brewing at programmed time	Clock not set/program error	Set the clock correctly; reprogram brew time.
Coffee tastes weak or bitter	Grind size/strength setting	Adjust grind size (finer for stronger); select Bold strength.
Grinder not working	Hopper empty/lid open	Add beans; ensure hopper lid is closed securely.
Water not flowing	Clogged filter/water lines	Run cleaning cycle with vinegar; check for blockages.
Auto shut-off not working	Setting at 0 hours	Press AUTO OFF to select 1-4 hour delay.
Leaking water	Misaligned reservoir/carafe	Ensure reservoir is seated properly; carafe is centered.

Reset: Unplug for 1 minute, then plug back in to reset the control panel.

Service: For repairs not covered under warranty, contact Cuisinart Customer Service.