Cuisinart EM-1000 Manual

The Cuisinart EM-1000 is a high-performance espresso machine with a 15-bar pump, built-in conical burr grinder, adjustable coffee strength and temperature settings, programmable cup volumes, automatic milk frother, removable water tank and drip tray, and a stainless steel construction. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Using the Milk Frother 8. Cleaning & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 15-bar pump system, Conical Burr Grinder, Adjustable Coffee Strength Selector, Programmable Cup Volume, Automatic Milk Frother, Removable Water Tank, Removable Drip Tray.

Feature	Description
15-bar Pump	Professional pressure for optimal espresso extraction
Conical Burr Grinder	Grinds beans fresh for each cup with adjustable coarseness
Coffee Strength Selector	Adjusts from mild to strong brew intensity
Programmable Cup Volume	Set your preferred espresso or coffee volume
Automatic Milk Frother	Steams and froths milk for cappuccinos and lattes
Removable Water Tank	1.8L capacity for easy filling and cleaning
Removable Drip Tray	Catches spills and overflows for easy cleanup
Power Button	Turns machine on/off
Brew Selector	Chooses between single/double espresso or coffee
Temperature Control	Adjusts brew temperature for optimal flavor

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

Remove all packaging materials from inside and outside the machine.
Fill water tank: Remove tank, fill with fresh cold water, reinsert securely.
Insert drip tray: Place drip tray in position at front of machine.
Plug into AC power outlet (120V).

WARNING! Ensure machine is on a heat-resistant surface. Keep away from edges to prevent tipping.

First-Time Setup

Power on machine; allow to heat up (approx. 30 seconds).

Prime the system: Run water through without coffee to clean internal lines.
Set language: If applicable, select ENGLISH (default) in settings.
Program cup volume: Press and hold brew button until desired volume is reached, then release to save.
Adjust grinder: Turn dial to desired coarseness (finer for espresso, coarser for coffee).

CAUTION! Do not touch hot surfaces during operation. Use handles provided.

Specifications

Type: Semi-automatic espresso machine with grinder.
Pump Pressure: 15 bar.
Water Tank Capacity: 1.8 liters.
Grinder: Conical burr, adjustable settings.
Brew Options: Single/Double Espresso, Coffee.
Milk System: Automatic frother with steam wand.
Power Source: 120V AC, 60Hz.
Dimensions: Standard countertop size.
Weight: Moderate; ensure stable placement.

Controls and Settings

Access settings via control panel. Front Panel: POWER, BREW SELECTOR, STRENGTH, CUP VOLUME, TEMPERATURE, MILK FROTHER.

Display: Shows current settings, alerts, and programming mode.

Brew Settings: Strength (1-5), Temperature (Low/Medium/High), Cup Volume (programmable). Grinder: Adjust coarseness dial. Milk Frother: On/Off, steam duration setting. System: Language, reset to factory defaults, descale alert.

Brewing Coffee

Supports whole beans or pre-ground coffee.

Add beans: Fill hopper with fresh coffee beans.
Select brew: Choose single/double espresso or coffee.
Adjust strength: Use STRENGTH button to set intensity.
Place cup: Position under brew head.
Start brew: Press brew button; machine grinds and brews automatically.
Stop manually: Press brew button again to stop early.

Tip: Use fresh, cold water for best taste. Preheat cups for hotter coffee.

Using the Milk Frother

For cappuccinos, lattes, and hot milk.

Fill pitcher: Use cold milk (do not exceed max line).
Attach wand: Position steam wand into milk pitcher.
Select frother: Press MILK FROTHER button.
Adjust: Turn knob to control steam intensity.
Stop: Press button again or wait for auto-stop.
Clean wand: Wipe immediately after use to prevent clogging.

WARNING! Steam is extremely hot. Keep hands clear. Never operate without milk in pitcher.

Cleaning & Maintenance

Daily: Wipe exterior with damp cloth. Empty drip tray and grounds container. Weekly: Clean brew group and steam wand. Monthly: Descale machine using approved descaling solution.

CAUTION! Unplug before cleaning. Never immerse machine in water. Use only recommended cleaning agents.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't turn on	Power connection	Check plug; ensure outlet works; press POWER firmly.
No coffee flow	Clogged brew head/grinder	Clean brew group; check for blockages; ensure water tank full.
Weak espresso	Grind setting/beans	Adjust grinder finer; use fresher beans; check pressure.
Milk frother not working	Clogged wand/no milk	Clean steam wand tip; ensure milk is cold; check settings.
Descale alert active	Mineral buildup	Run descaling cycle with approved solution.

Reset: Hold POWER and BREW buttons for 5 seconds to reset settings.

Service: 1-800-726-0190; www.cuisinart.com