Cuisinart Grind & Brew Thermal DGB-600 Manual

The Cuisinart Grind & Brew Thermal DGB-600 is a fully automatic coffee maker with an integrated burr grinder, thermal carafe, programmable timer, and multiple brew strength settings. It features a 12-cup capacity, charcoal water filter, automatic shutoff, and a sleek stainless steel design. Below are key sections for safety, features, setup, operation, cleaning, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Programming the Timer 7. Grinding & Brewing 8. Cleaning & Maintenance 9. Safety Information 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Integrated burr grinder, Thermal carafe, Programmable control panel, Charcoal water filter, Coffee bean hopper, Water reservoir.

Feature	Description
Burr Grinder	Grinds beans fresh before brewing; adjustable grind size
Thermal Carafe	Stainless steel, 12-cup capacity, keeps coffee hot for hours
Programmable Timer	Set brew time up to 24 hours in advance
Brew Strength Selector	Regular or Bold brew options
Charcoal Water Filter	Removes impurities for better tasting coffee
Auto Shutoff	Turns off automatically after brewing
Grind Off Brew	Option to use pre-ground coffee
Pause & Serve	Interrupt brewing to pour a cup
LCD Display	Shows time, settings, and status
Audible Signal	Beeps when brewing is complete

Installation & Setup

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from inside and outside the unit.
Wash carafe lid and filter basket with warm, soapy water; rinse thoroughly.
Insert charcoal water filter into holder in water reservoir (soak filter first for 15 minutes).
Fill water reservoir to maximum line and run a brewing cycle without coffee to clean the system.
Plug into 120V AC outlet.

WARNING! Do not immerse unit, cord, or plug in water. Keep away from heat sources.

First-Time Use

Before first brew, perform a cleaning cycle.

Ensure charcoal filter is installed and soaked.
Fill reservoir with fresh water to MAX line.
Place empty carafe on warming plate.
Press PROGRAM to set clock time.
Press BREW to start cleaning cycle (no coffee).
Discard water from carafe after cycle completes.
Unit is now ready for brewing.

CAUTION! Handle carafe with care; thermal walls are hot after brewing.

Specifications

Capacity: 12 cups (60 oz) thermal carafe.
Grinder Type: Conical burr grinder with adjustable settings.
Brew Strength: Regular or Bold.
Programmability: 24-hour digital timer.
Filter: Permanent gold-tone filter; charcoal water filter included.
Power: 120V AC, 60Hz, 1000W.
Dimensions: 14.5" H x 9.5" W x 8.5" D.
Weight: 11 lbs.
Materials: Stainless steel housing, BPA-free plastic components.

Controls and Settings

Control Panel: POWER, PROGRAM, HOUR, MIN, BREW STRENGTH, GRIND OFF, AUTO ON, AUTO OFF.

Functions: Set clock, program brew time, select brew strength, activate grind-off mode, set auto on/off.

Grind Settings: Adjustable dial on side of grinder (Fine to Coarse). Brew Strength: Regular (standard) or Bold (stronger flavor). Timer: Program start time up to 24 hours ahead. Auto Shutoff: Turns off 0-4 hours after brewing (selectable).

Programming the Timer

Set the unit to brew automatically at a specific time.

Press and hold PROGRAM until hour digits flash.
Press HOUR to set desired hour (AM/PM).
Press MIN to set minutes.
Press BREW STRENGTH to select Regular or Bold.
Press PROGRAM again to confirm.
Fill water reservoir and add beans to hopper.
Unit will grind and brew at the set time.

Tip: Ensure carafe is properly seated and lid is closed for programmed brew.

Grinding & Brewing

For fresh ground coffee or pre-ground.

Fill water reservoir to desired cup level.
Add whole beans to hopper (max 1/2 lb).
Select grind setting (Fine for strong, Coarse for mild).
Select brew strength (Regular/Bold).
Place carafe on warming plate.
Press BREW to start cycle.
For pre-ground: Press GRIND OFF, add grounds to filter basket, then press BREW.
Use PAUSE & SERVE to pour a cup during brewing.

WARNING! Never remove carafe while brewing unless using Pause & Serve feature.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Rinse carafe and filter basket after use.
Weekly: Clean grinder by running 1/4 cup rice through it to remove oils.
Monthly: Descale with vinegar solution (1 part vinegar to 2 parts water).
Filter: Replace charcoal water filter every 60 cycles or 2 months.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug before cleaning. Never immerse unit in water.

Safety Information

Read all instructions before use. Avoid contact with hot surfaces. Do not operate if cord or plug is damaged. Use only with 120V outlet. Keep away from children. Do not use outdoors. For household use only.

Warranty & Support

Cuisinart offers a 3-year limited warranty. Register product online at www.cuisinart.com. For customer support, call 1-800-726-0190 or visit website. Keep original receipt for warranty claims.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffee not brewing	Power/water	Ensure unit is plugged in; check water reservoir is filled.
Grinder not working	Hopper empty/jammed	Add beans; check for obstruction; clean grinder.
Weak coffee	Grind setting/strength	Adjust grind to finer setting; select Bold brew strength.
Leaking water	Misaligned carafe	Ensure carafe is properly seated under brew basket.
Timer not working	Program not set	Reprogram timer; ensure clock is set correctly.
No power	Outlet/circuit	Check outlet; reset circuit breaker; try different outlet.

Reset: Unplug for 10 minutes, then plug back in to reset electronic controls.

Service: 1-800-726-0190; www.cuisinart.com