Cuisinart PerfecTemp DCC-3200P1 Manual

The Cuisinart PerfecTemp DCC-3200P1 is a 14-cup programmable coffeemaker featuring the exclusive Cuisinart PerfecTemp technology, which allows you to choose from six brewing temperatures to optimize flavor for any type of coffee. It includes a 1-4 cup setting, 24-hour programmability, auto-shutoff, self-clean function, and a charcoal water filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: Glass carafe with ergonomic handle, Charcoal water filter, Removable water reservoir, Brew Pause feature, LCD display with clock.

Feature	Description
PerfecTemp Technology	Six temperature settings (185°F - 205°F) for optimal coffee flavor
14-Cup Capacity	Brews up to 14 cups (6 oz per cup) of coffee
1-4 Cup Setting	Adjusts brewing parameters for smaller batches
24-Hour Programmability	Set brew time in advance
Auto Shut-Off	Automatically turns off after brewing is complete (0-4 hours)
Brew Pause	Pause brewing to pour a cup before cycle finishes
Self-Clean Function	Indicator light prompts for cleaning cycle
Charcoal Water Filter	Removes chlorine and impurities for better tasting coffee
LCD Display	Shows time, program status, and settings
Audible Alert	Beeps when brewing is complete

Installation

Unpack and inspect contents. Place on a clean, dry, level, and heat-resistant surface.

Remove all packaging materials and stickers.
Wash the carafe, lid, and filter basket with warm, soapy water. Rinse and dry.
Insert the charcoal water filter into the holder in the water reservoir (soak filter first for 15 minutes).
Fill the water reservoir with cold water to the desired level.
Plug the power cord into a standard 120V AC outlet.

WARNING! Do not immerse the coffeemaker base, cord, or plug in water or other liquids. Ensure the power cord is not dangling over the edge of a counter.

First-Time Setup

Plug in the coffeemaker; the LCD will illuminate.

Set the clock: Press and hold the HOUR and MINUTE buttons to set the current time.
Prime the filter: Run a brewing cycle with only water (no coffee) to saturate the charcoal filter.
Select default temperature: Press the TEMP button to cycle through options (default is 200°F).
Set auto-shutoff: Press the AUTO OFF button to select duration (0, 1, 2, 3, or 4 hours).

CAUTION! The heating plate and carafe become hot during use. Handle with care using the handle.

Specifications

Model: DCC-3200P1
Capacity: 14 cups (6 oz per cup)
Power: 120V AC, 60Hz, 1050W
Temperature Settings: 6 (185°F, 190°F, 195°F, 200°F, 203°F, 205°F)
Programmability: 24-hour advance brew start
Auto Shut-Off: Programmable (0-4 hours)
Filter: Permanent gold-tone filter; includes charcoal water filter
Dimensions: Approximately 11.5" H x 9.5" W x 14.5" D
Weight: Approximately 7.5 lbs
Warranty: 3-year limited warranty

Controls and Settings

Access functions via the front control panel. LCD Display: Shows time, program status, and selected options.

Buttons: POWER, TEMP (temperature select), 1-4 CUP, PROGRAM (set brew time), HOUR, MINUTE, AUTO OFF, CLEAN (self-clean indicator).

Temperature: Cycle through six settings with TEMP button. Programmability: Use PROGRAM, HOUR, and MINUTE to set future brew time. Auto Shut-Off: Select duration (0-4 hours) with AUTO OFF. 1-4 Cup Setting: Press button when brewing small batches for optimized flavor.

Brewing Coffee

Supports ground coffee; use medium grind for best results.

Fill the water reservoir with cold water to desired cup level.
Place a paper filter or use the permanent gold-tone filter in the filter basket.
Add ground coffee (1 tablespoon per cup, adjust to taste).
Place the empty carafe on the warming plate.
Press POWER to begin brewing. The BREW light will illuminate.
To pause brewing, press BREW PAUSE (lift carafe). Replace within 30 seconds to resume.
When brewing is complete, an audible alert will sound. The AUTO OFF countdown begins.
To program for later: Set clock, then press PROGRAM and use HOUR/MINUTE to set start time. The PROGRAM light will illuminate.

WARNING! Do not remove the carafe while brewing unless using the Brew Pause feature. Hot liquid may spill.

Cleaning & Maintenance

Unplug and cool completely before cleaning. Wipe exterior with a damp cloth. Do not use abrasive cleaners.

Daily: Empty and rinse carafe and filter basket.
Monthly: Run a cleaning cycle with a coffeemaker cleaner or a solution of vinegar and water.
Self-Clean: When the CLEAN light illuminates, press and hold the CLEAN button for 3 seconds to start the cycle (run with water only).
Charcoal Filter: Replace every 60 brew cycles or every 2 months.

CAUTION! Never immerse the base, cord, or plug in water. Do not clean with scouring pads or harsh chemicals.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Cuisinart. For support, visit www.cuisinart.com or contact 1-800-726-0190. This appliance is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Coffeemaker won't turn on	Power cord not plugged in	Ensure cord is securely plugged into a working outlet.
Water does not flow	Clogged filter or water line	Clean filter basket and permanent filter; run a cleaning cycle.
Coffee is not hot enough	Temperature setting too low	Press TEMP button to select a higher brewing temperature.
Programmed brew doesn't start	Clock not set correctly	Reset the clock and reprogram the brew time.
CLEAN light is on	Maintenance required	Run the self-clean cycle as described in the manual.
Leaking water	Misaligned or overfilled reservoir	Ensure reservoir is properly seated and not filled past MAX line.

Reset: Unplug for 10 minutes, then plug back in to reset the control panel.

Service: 1-800-726-0190; www.cuisinart.com