Cuisinart PurePrecision Manual

The Cuisinart PurePrecision is a premium water filtration and dispensing system designed for home use. It features multi-stage filtration technology, hot and cold water dispensing, child safety lock, digital temperature display, filter replacement indicator, and energy-saving modes. Compatible with standard water lines, it provides purified water for drinking, cooking, and beverages. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Water Supply 7. Using the Dispenser 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital control panel, hot/cold water taps, filter housing, drip tray, water reservoir, and power cord.

Feature	Description
Multi-stage filtration	Removes contaminants, chlorine, and impurities
Hot & cold water dispensing	Separate taps for instant hot and chilled water
Digital temperature display	Shows current water temperature in Fahrenheit/Celsius
Filter replacement indicator	LED alert when filter needs changing
Child safety lock	Prevents accidental hot water dispensing
Energy-saving mode	Reduces power consumption when not in use
Drip tray	Removable tray for easy cleaning
Filter housing	Easy-access compartment for filter replacement
Power button	Turns system on/off
Temperature adjustment	Customize hot and cold water temperatures

Installation

Unpack and inspect contents. Place on stable, level surface near water source and power outlet.

Connect to water supply: Attach included tubing to cold water line valve.
Install filter: Insert filter into housing, twist to lock.
Plug into power outlet: Use grounded 120V AC outlet.
Prime the system: Follow first-time setup to flush air from lines.

WARNING! Ensure water connections are tight to prevent leaks. Do not use with hot water supply line.

First-Time Setup

Power on unit; follow initialization process.

Flush system: Dispense water for 5 minutes to clear air and carbon fines.
Set temperature: Use control panel to adjust hot (default 190°F) and cold (default 40°F) settings.
Activate child lock: Press and hold safety button for 3 seconds to enable.
Set filter reminder: Program filter lifespan (default 6 months).

CAUTION! Hot water can cause burns. Always test temperature before use.

Specifications

Dimensions: 15.5" H x 10.2" W x 8.7" D.
Water Capacity: 3-liter reservoir.
Filtration: 5-stage filter, reduces lead, chlorine, cysts.
Temperature Range: Hot: 160-200°F, Cold: 34-50°F.
Dispensing Rate: Hot: 0.5 gal/min, Cold: 0.75 gal/min.
Power: 120V AC, 60Hz, 750W heating element.
Filter Life: 300 gallons or 6 months (whichever first).
Operating Temp: 40-100°F ambient.

Controls and Settings

Access settings via digital control panel. Front buttons: POWER, TEMP UP/DOWN, LOCK, FILTER RESET.

Display icons: Power indicator, hot/cold ready lights, filter alert, lock symbol.

Temperature adjustment: Press TEMP buttons to set desired hot/cold temperatures. Child lock: Press LOCK to enable/disable hot water tap. Filter reset: Hold FILTER RESET for 5 seconds after replacement. Energy save: System enters standby after 2 hours of inactivity.

Connecting to Water Supply

Required: Cold water line, shut-off valve, tubing, wrench.

Turn off main water supply before connecting.
Install tee valve on cold water line.
Connect tubing from valve to unit's water inlet.
Turn water back on slowly; check for leaks.

Tip: Use thread seal tape on connections to prevent leaks.

Using the Dispenser

Dispenses hot, cold, or room temperature water.

Select temperature: Press hot or cold tap lever.
Dispense: Press cup against lever or use manual button.
Stop: Release lever or button.
Hot water safety: Must press unlock button simultaneously if child lock enabled.
Continuous flow: Hold lever for extended dispensing.
Pause: Release to stop flow.

WARNING! Never leave children unattended near hot water dispenser.

Safety Features

Child Safety Lock: Prevents accidental hot water dispensing. Auto Shut-off: Turns off heating element when reservoir is empty. Overheat Protection: Cuts power if temperature exceeds safe limit. Drip Tray: Collects spills to prevent surface damage.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean drip tray weekly with mild detergent.

Monthly maintenance: Descale heating element with vinegar solution if in hard water area.

CAUTION! Do not immerse unit in water. Use only approved cleaning solutions.

Regulatory Information

NSF/ANSI 42 & 53 certified for contaminant reduction. FCC Part 15 compliant. UL listed for safety. Copyright © 2023 Cuisinart; trademarks of Conair Corporation. For support, visit www.cuisinart.com or contact 1-800-726-0190.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No water flow	Water supply off/clogged filter	Check water valve; replace filter if clogged.
Water not hot enough	Temperature setting/low voltage	Adjust temperature setting; ensure proper voltage.
Filter indicator on	Filter expired	Replace filter; reset indicator.
Leaking water	Loose connections	Tighten all connections; check tubing for cracks.
Unit not powering on	Power outlet/breaker	Check outlet; reset circuit breaker.

Reset: Unplug for 2 minutes, then restart.

Service: 1-800-726-0190; www.cuisinart.com