Cuisinart SCC-1000W Manual

The Cuisinart SCC-1000W is a high-performance single-serve coffeemaker designed for convenience and quality. It features a 40-ounce removable water reservoir, programmable auto-start, adjustable cup size (6-12 oz), a removable drip tray for tall travel mugs, a descaling alert, and a charcoal water filter. Compatible with most single-serve pods and ground coffee using the included reusable filter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Guide 7. Cleaning & Maintenance 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brew head, Removable water reservoir, Control panel with LCD display, Cup platform with adjustable height, Drip tray, Charcoal water filter, Reusable coffee filter.

Feature	Description
40 oz Removable Reservoir	Easy-fill water tank with handle
Programmable Auto-Start	Set brew time up to 24 hours in advance
Adjustable Cup Size	6, 8, 10, or 12 oz brew settings
Removable Drip Tray	Accommodates travel mugs up to 7" tall
Descaling Alert	Indicator light reminds when to descale
Charcoal Water Filter	Improves taste, reduces impurities (included)
Brew Strength Control	Regular or Bold setting
Reusable Coffee Filter	For use with ground coffee
Pod Compatible	Works with most single-serve pods
Power Button	Turns unit on/off

Installation & Setup

Unpack and inspect contents. Place on clean, level, heat-resistant surface.

Remove all packaging materials and stickers.
Wash removable parts: reservoir, drip tray, reusable filter with warm soapy water.
Insert charcoal filter into reservoir: Soak filter 15 minutes, then place in holder.
Fill reservoir with cold water and place back on unit.
Plug into 120V AC outlet.

WARNING! Keep away from edges. Do not place under cabinets when in use.

First-Time Use

Prime the system before first brew.

Ensure reservoir is filled and properly seated.
Place a mug on the drip tray.
Press POWER to turn on. LCD will illuminate.
Without a pod or coffee, press 12 oz brew button. Let water run through into mug.
Discard water. Machine is now ready for brewing.

CAUTION! Do not touch hot surfaces. Use handles or knobs.

Specifications

Model: SCC-1000W
Water Reservoir: 40 oz removable
Brew Sizes: 6, 8, 10, 12 oz
Power: 1500W, 120V AC, 60Hz
Dimensions: 12.5" H x 9.5" W x 13" D
Weight: 7.5 lbs
Cord Length: 30 inches
Warranty: 3-year limited
Compatibility: Most single-serve pods, ground coffee

Controls and Settings

Control Panel: POWER, BREW STRENGTH (Regular/Bold), CUP SIZE (6,8,10,12 oz), PROGRAM, DESCALE indicator.

LCD Display: Shows time, programmed brew time, cup size, and alerts.

Programming Auto-Start: Press PROGRAM, use +/- to set time, press PROGRAM again to confirm. Brew Strength: Press to toggle between Regular (standard) and Bold (stronger flavor). Cup Size Selection: Press desired size before brewing. Descale Alert: Flashing light indicates need to descale.

Brewing Guide

For pods or ground coffee.

Ensure power is on and reservoir has water.
Place mug on drip tray.
Lift brew head handle and insert pod OR add ground coffee to reusable filter.
Close brew head firmly.
Select cup size (6,8,10,12 oz).
Select brew strength if desired (Regular/Bold).
Press brew button. Brewing begins immediately.
When finished, lift brew head to discard pod/grounds.

Tip: Preheat mug with hot water for hotter coffee.

Cleaning & Maintenance

Daily: Wipe exterior with damp cloth. Weekly: Clean removable parts.

Unplug and cool completely.
Remove reservoir, drip tray, reusable filter.
Wash with warm soapy water; rinse thoroughly.
Wipe brew head with damp cloth.
Dry all parts before reassembly.
Replace charcoal filter every 2 months or 60 tank refills.

CAUTION! Do not immerse base in water. Never use abrasive cleaners.

Descaling Procedure

Required when DESCALE light flashes (approx. every 3-6 months).

Fill reservoir with 16 oz white vinegar and 16 oz water.
Place large mug or carafe on drip tray.
Press and hold 10 oz and 12 oz buttons together for 3 seconds to start descale mode.
Let half solution brew through, then pause 30 minutes.
Brew remaining solution.
Run 2-3 reservoirs of clean water through to rinse.

WARNING! Use only vinegar or commercial descaling solution. Follow instructions carefully.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Not plugged in / outlet issue	Check plug; try different outlet; ensure power button is on.
Water not heating	Mineral buildup	Descale following procedure.
Slow brewing	Clogged needle / filter	Clean brew head needle with paperclip; check filter.
Leaking water	Improperly seated reservoir	Remove and reseat reservoir; check for cracks.
Weak coffee	Incorrect grind / old pods	Use fresher pods; adjust grind if using ground coffee.
DESCALE light on	Mineral buildup	Perform descaling procedure.

Reset: Unplug for 2 minutes, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com