Cuisinart WCM-11SA Manual

The Cuisinart WCM-11SA is a 12-Cup Programmable Coffeemaker with 24-hour programmability, auto shut-off, self-cleaning function, adjustable warming plate, and a charcoal water filter. It features a stainless steel finish, a digital clock with timer, and a pause-and-serve function. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning & Maintenance 8. Programming Guide 9. Care Instructions 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-cup glass carafe, Charcoal water filter, Digital control panel, Warming plate, Removable filter basket, Power base with cord storage.

Feature	Description
24-Hour Programmability	Set brew time in advance
Auto Shut-Off	Turns off automatically after brewing (0-4 hours)
Self-Cleaning	Cleans internal components with water/vinegar solution
Adjustable Warming Plate	Keeps coffee warm (Low/High settings)
Pause & Serve	Pause brewing to pour a cup
Charcoal Water Filter	Reduces impurities for better taste
Digital Clock/Timer	Displays time and program settings
Removable Filter Basket	Easy cleaning and paper/conical filter use
Cord Storage	Wrap excess cord under base
Stainless Steel Finish	Durable and easy to clean

Installation

Unpack and inspect contents. Place on clean, dry, level surface.

Remove all packaging materials from coffeemaker and carafe.
Wash carafe and filter basket with warm, soapy water; rinse thoroughly.
Insert charcoal water filter into filter holder (soak filter first per instructions).
Place empty carafe on warming plate.
Plug into 120V AC outlet.

WARNING! Do not immerse coffeemaker, cord, or plug in water. Keep away from heat sources.

First-Time Setup

Power on coffeemaker; set clock and preferences.

Set clock: Press and hold CLOCK button, use HOUR/MIN to set time, press CLOCK to confirm.
Prime filter: Run a cycle of clean water (without coffee) to activate charcoal filter.
Adjust warming plate: Press WARM button to select Low or High setting.
Set auto shut-off: Press AUTO OFF to choose duration (0, 1, 2, 3, or 4 hours).

CAUTION! Ensure carafe is properly seated before brewing to prevent spills.

Specifications

Capacity: 12 cups (60 oz).
Power: 120V AC, 60Hz, 900W.
Dimensions: 10.5" H x 8.5" W x 14" D.
Carafe: Glass, 12-cup with ergonomic handle.
Filter: Charcoal water filter included; compatible with paper filters (#4).
Warming Plate: Adjustable (Low/High).
Programmability: 24-hour advance brew start.
Auto Shut-Off: 0 to 4 hours selectable.
Finish: Brushed stainless steel.

Controls and Settings

Control Panel: POWER, PROGRAM, CLOCK, HOUR, MIN, AUTO OFF, WARM, CLEAN.

Buttons: POWER turns on/off; PROGRAM sets brew time; CLOCK sets time; HOUR/MIN adjust time; AUTO OFF sets shut-off delay; WARM adjusts plate temperature; CLEAN initiates cleaning cycle.

Settings: Clock (12/24 hour format), Auto Shut-Off (0-4 hrs), Warming Plate (Low/High), Program Start Time. Indicators: Power On, Program Set, Warming, Clean.

Brewing Coffee

For regular or programmed brewing.

Fill water reservoir with cold water (use cup markings).
Insert filter (paper or permanent) into basket.
Add ground coffee (1 tbsp per cup).
Place carafe on warming plate.
Press POWER to brew immediately.
For programmed brew: Set clock, press PROGRAM, set start time with HOUR/MIN, press PROGRAM to confirm.
Pause & Serve: Press PAUSE during brewing to pour a cup.

Tip: Use filtered water for best taste. Clean carafe after each use.

Cleaning & Maintenance

Regular cleaning ensures optimal performance.

Daily: Empty and rinse carafe, filter basket.
Weekly: Clean exterior with damp cloth; descale if needed.
Monthly: Replace charcoal water filter (soak new filter 15 minutes first).
Self-Clean: Press CLEAN button, add equal parts water/vinegar to reservoir, run cycle, then run 2 cycles with clean water.

WARNING! Unplug before cleaning. Do not use abrasive cleaners.

Programming Guide

Set coffeemaker to brew at a specific time.

Ensure clock is set correctly.
Press PROGRAM; "PROG" light flashes.
Press HOUR to set hour, MIN to set minutes for brew start.
Press PROGRAM to confirm; "PROG" light stays on.
Add water, filter, coffee as usual.
Coffeemaker will brew at set time.
To cancel program: Press PROGRAM twice.

Note: Power interruption resets program; reset clock after outage.

Care Instructions

Unplug and cool before cleaning. Wipe exterior with soft, damp cloth.

CAUTION! Do not immerse in water. Avoid harsh chemicals. Store in dry place.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Not plugged in/outlet issue	Check plug; try different outlet; ensure POWER is on.
Coffee not brewing	Water reservoir empty/program not set	Fill reservoir; check program settings; press POWER.
Coffee tastes bad	Old filter/water quality	Replace charcoal filter; use fresh water; clean coffeemaker.
Leaking	Carafe not seated/filter misaligned	Ensure carafe is properly placed; check filter basket.
Clock resets	Power outage	Reset clock after power restoration.
Warming plate not heating	Setting on Low/circuit issue	Adjust to High; check power.

Reset: Unplug for 10 seconds, then plug back in.

Service: 1-800-726-0190; www.cuisinart.com